User's Manual

36. Features Programmed Table ( 1 )
Follow the steps as below.
(1) Turn the ignition “ON” ( Engine must not be running)
(2) Press and release the override switch 6 times.
(3) Turn the ignition “OFF ” , siren chirps 6 times to confirm it has entered programming mode.
(4) During programming mode, each press on override switch is followed by 1 siren chirp .The number of
siren chirps reflect default “ ON “ and “OFF” as shown in the chart below. The shaded value is the factory
default setting.
Features Program Table [1]
Operation of buttons
Pressing on
Over-ride switch
Program Options
K1
K2
K3
K4
1 time
Engine runtime upon each remote start for 5/10/15/20 min
□5
□10
□15
□20
2 times
Temp-controlled engine start at -5º/-10º/-20º/-30º
□-5º
□-10º
□-20º
□-30º
3 times
Crank time for each remote start ( with longer stepup time
for next attempted remote start )
□800ms
□1000ms
□1600ms
□2000ms
4 times
CH # 2 output time 0.8s/10s/30s/on.off
□0.8s
□10s
□30s
□On/off
5 times
CH # 3 output time 0.8s/10s/30s/on.off
□0.8s
□10s
□30s
□On/off
6 times