User's Manual

Operation guide of 2 way remote unit
This is devised for easy operation just by some
fixed function
by buttons and
m ovable cursor means
. Users can choose the
desired function just by first popping out the cursor and then moving it on to the related function Position.
There are total 3 buttons marked with
【Ⅰ、Ⅱ、Ⅲ
on the remote unit. The
、Ⅱ
buttons are used in alarm function
mode setting and the third 【Ⅲ】 button is used in popping out and moving of the cursor on to the desired function position.
Pre-assigned function modes by remotes buttons
Remotes button
: Press and hold this for engine-start and shutoff
Remotes button
: Press and hold this for trunk release.
Remotes button
:
Press and release both
&
simultaneously for car search.
Remotes button
:
Press and hold both
&
simultaneously for remote panic
Programmed function modes by a short press of button 【Ⅰ
Press and release this to activate self-defined function .It is generally programmed for door lock/unlock. Other functions can also
be programmed as below
Step 1:
Press button
Ⅲ】
twice or more times quickly to pop up the cursor. Move the cursor to the desired position by pressing
button
Ⅲ】
a number times as necessary . For example, move the cursor on to position, if you want to have
Audible Arm Mode function activated by a short press of button
Ⅰ】
.
Step 2:
When the cursor reaches the desired position, press and hold
Ⅲ】
again for 6 sec till the remote unit sounds the first 2
and final 3 beeps . From then on, press and release button
Ⅰ】
to activate the selected function.
To re-define the function of button
Ⅰ】
re-do the procedure from procedure step (1) & (2).The previously-defined function
mode will be substituted by the last definition.