User's Manual

17. Switch-controlled anti-carjack ON/OFF
(a)、While the engine is running ; press the anti-carjack to activate this function switch .The activated anti-carjack mode
undergoes 2 stages as below：
(1) In the 1
st
stage; the parking light flashes for 30 sec.
(2) In the 2
nd
stage; in the next 30 sec that follows the 1st stage ,there will be another 30 sec alert period during which 【(a) the
parking light keeps flashing, (b) siren continues blurting, (c) the engine start circuit is cutoff till active anti-carjack mode is
cleared】。
＊ At any of the alert stages, choose either (a) or (b) to deactivate the on-going alert.
(a)、To deactivate alert by switch , press and hold for 5 sec the anti-carjack switch (or)
(b)、To deactivate alert by remote unit, press 【Ⅲ】 2 or more times to pop up the cursor and move onto『 』on the remote
unit.
18. Remote valet ON /OFF
(a)、Press【Ⅲ】2 or more times to get the cursor and move onto【 】。
(b)、Then press and release【Ⅱ】to enter valet mode ON. The siren chirps 4 times with 4 flashes of parking light .Under the valet
ON mode, all functions are inoperative except for the remote door unlock and trunk release which are still operable.
( c)、Press and release 【Ⅱ】again to get valet mode OFF .The main system then restores all functions back to normal and
become operative.
l The remote LCD displays as below：
(d) 、While the valet mode is ON, the LCD remote displays『 』and sounds melody.
(e) 、While the Valet mode is OFF, the 『 』disappears from remote’s screen but the remote sounds melody.