User's Manual
7. Remote control temperature-controlled auto-start ON/OFF
【 intended use in frigid countries】
(a)、 Press quickly【Ⅲ】 2 or more times to pop up the cursor and move it onto
【 】.
(b)、Then press and release 【Ⅱ】.The siren chirps 3 times with 3 parking light flashes. The engine will start automatically at
pre-selected temperature and begin running and automatically shut off when the pre-set run time expires.
(c)、“OFF” mode setting of temperature-controlled auto-start,Press and release
【Ⅱ】
to turn the temperature-controlled
auto-start to “OFF” mode.
l The remote unit responses as below:
(d)、If temperature-controlled auto-start ON is activated; the remote screen shows 『
』to confirm this function is activated
and the pre-set temperature icon like 『- 』 appear on the display. The transmitter unit sounds melody.【When the main
system sensed - temperature, the engine get started automatically】.
(e)、If temperature-controlled auto-start OFF is activated; the icon 『
』disappears from remote’s screen and the remote unit
sounds melody for confirmation.
(f)、The temp-controlled auto-start repeats maximum 6 cycles daily, with 2 hours interval between cycles.
l The temperature can be selected for auto- start at -5º、-10º、-20º、-30º in accordance with your requirement.
8. Daily auto-start time ON/OFF
(a)、Press quickly【Ⅲ】2 or more times to pop up the cursor and then move it onto【 】
(b)、 Press and release 【Ⅱ】. Parking light flashes 6 times with 6 siren chirps .The engine will get started
at the selected time
daily after 24 hours from the setting.
(c)、To program OFF mode of the daily auto-start time,Press and release 【Ⅱ】to set the above setting to OFF mode.
l The remote unit displays different icons for different modes following the setting.
(d)、After the daily auto-start time is set to ON mode, the remote unit displays 『
』on its screen and sound melody.
(e)、After the daily auto-start time is set to OFF mode, the 『
』 disappears from the remote unit’s screen and sound melody.