User's Manual

21. Programmable function by over-ride switch
(a)、The LEA-825 model’ s functions 【valet, daily auto-start time ,temperature-controlled auto start 】can be
switched into ON/OFF modes using over-ride switch in the following procedure.
(1)、Turn the ignition OFF
(2)、Press and release the over-ride switch for assigned number of times to enter various modes [ 3 times
to enter valet change mode ]，[ 4 times to ent er daily auto-start time ]，[5 times to enter
temperature-controlled auto start]. The number of siren’ s chirps follow the equal number press on
the over-ride switch to confirm the current active mode .
(3)、Turn the ignition ON when the desired active mode is reached. [ Engine must not be running]
(4)、To choose the ON and OFF in any active mode, press again the over-ride switch 1 or 2 times. The
factory default setting is marked with shaded description like OFF.
Manual features program table Procedure (4) Procedure (4)
Press 3 times over-ride switch for choice of valet “ON”, “OFF”
mode
Press once for “ON Press twice for
“OFF”
Press 4 times over-ride switch for choice of daily auto-start time
“ON”, “OFF” mode
Press once for
“ON”(see Note)
Press twice for
“OFF”
Press 5 times over-ride switch for choice of temp -controlled
auto-start “ON”, “OFF” mode
Press once for “ON Press twice for
“OFF”
Siren and L E D indicator 1 2
Note: If the daily auto-start time ON is programmed, the engine will be running immediately when the ignition
key is turned to OFF position.( Use the remote LCD unit to shut off the engine in this case.)
22. Manual ARM and DISARM (In case the remote transmitter is lost)
(a) Manual ARM
：
(1)、Turn the ignition key to ON position . [ Engine must not be running]
(2)、Press and release the over-ride switch 8 times
(3)、 Turn the ignition key to OFF position {siren chirps 1 time with 1 flash of parking light } After 20 sec, the
main system will enter ARM mode .
(b) 、 Manual DISARM ：
(1)、Turn the ignition key to ON position. [ Engine must not be running ]
(2)、Press and release the over-ride switch 4 times
(3)、Turn the ignition key to OFF position {siren chirps 2 times with 2 flashes of parking light}. The system
will enter DISARM mode.
Note:
(a)、Under manual ARM mode; if the system is triggered, the system will enter initial alert mode ( siren chirps
3 times with 3 flashes of parking light ). 20 sec later , the system enter Alarm and Warn Away Mode. [The
alarm trigger at this stage can be terminated by the car owner]。
(b)、Under manual ARM or DISARM modes, all the system’ s features can still be operated by the remote
transmitter.
11