User's Manual

12. Active channel # 2 (for use to turn on headlight for example )
(a)、This function can be remote controlled even the main system is arm or disarm modes. ( an additional
accessory is required and can be programmed for the desired function ). For example: the 30 sec headlight
ON.
(b)、Press and release【 】： The parking light flashes 2 times and headlight turns on for 30 sec before
automatically turns itself off.
l The remote LCD shows up the car’ s current status and sounds melody.
Note: This can be programmed according t o your requirement.[RF features programmable]。
13. Car locator/search
(a)、Press and release both【 + 】 simultaneously; siren chirps 6 times with 6 flashes of parking light.
l The remote LCD shows up the car’ s current status and sounds melody.
14. Shock sensor by pass
(a)、This function can be activated to avoid false alarm especially when the car is parked in an area near a
rail-line or where trucks frequently passes by. Whether in lock/arm or unlock/disarm modes, press both
and release both【 + 】simultaneously，the main system’ s shock sensor becomes ineffective but the
other security functions lock/arm mode are operable.
l The remote LCD shows up『 』 and 『 』 with one beep alert.
Note ：
(b)、Press 【 】button to get the inactive shock sensor into normal working mode again.。
(c)、During the system’ s arm mode, after the shock sensor is being triggered for 8 times; the system will bypass
the shock sensor.
15. Alarm mode
&
warn away
(a)、In arm mode; if the car detects any impact , the shock sensor’ s first stage will be triggered. The siren chirps
3 times with 2 flashes of parking light.
l The remote LCD shows up 『 』with one long beep alert.
(b)、If the heavier impact is detected by the main system, the second stage shock sensor will be triggered .The
siren blurts for 15 sec with parking light flashing for the same time.
l The remote LCD shows up『 』with beep alert for 15 sec.
(c)、If the trigger is generated by other means like door open, trunk/hood open or ignition “ON” under arm
mode,the siren blurts 30 sec with parking light flashing for the same time and the engine start circuit is
killed.
l The remote LCD will show up icon of triggered zone and keep beeping for 30 sec.
Note:
(d)、While the alert is being triggered in arm mode, press and release【 】once to disable triggering. The 2
nd
press and release of 【 】to make the main system enter unlock/disarm mode.
(e)、The main system will enter security mode during or after the triggered zone is closed. In case that the
trigged zone is still open, the system will isolate it . But the system will still protect all other zones .
9