MINI46 User’s Manual
CONTENTS MINI46 Features ���������������������������������������������������������������������������������������� 01 Appearance Introduction���������������������������������������������������������� 02 Accessories Supplied with the Mini-46��������������������������������� 04 Installation of Accessories ������������������������������������������������������ 05 Thank you for purchasing LP-Mini 46 ultra compact handhold FM transceiver manufactured by Wintecronics.
Features Appearance Introduction 1. Wide frequency coverage that suits application in many countries. 32 programmable channels and 2 programming keypads Internal TCXO resonator to enhance freq. stability Digitally designed to ensure stable quality Extra-small size in rugged case, compliant with US military environment test 6. Signal light indicator ON/OFF 7. Independent CTCSS/DCS 8. Narrow band (2.5K)/ Wide band (5K) programmable options 9. 9 steps of VOX (voice-activated feature) 10.
Appearance Introduction Functions 1. Antenna (SMA socket) 2. LED Indicator 3. Power Switch / Volume Control 4. External Mic. Jack Provide attached SMA rubber flex Antenna or other 50Ω impedance Antenna. Note LED Indicator turns on red when transmitting. LED Indicator turns on green when SQL. Rotate the power switch / volume control knob clockwise to switch power ON. When the click sound of switch and the melody is heard, the transceiver is powered. Adjust volume appropriately. Note 1.
Installation of Accessories To Install Place battery pack into battery compartment, when the click sound of switch, it will lock into compartment. To Remove 1. holding radio in one hand, push up battery latch 2. slide battery pack backwards 5 Installation of Accessories To remove belt clip Lift belt clip lock tab up, then gently pull the belt clip up. To install belt clip Slide the clip up into the slot on the back of radio until the belt clip latch clicks.
Installation of Accessories Battery charging 1.Green On: Charger is powered by the adapter. 2.Turns Red: Battery is charging. 3.Flash Green Light: Battery is fully charged. 4.Flash Red Light: Battery failed. (2W Radio / Battery) 5.Flash Red & Green Light: Battery failed. (4W Radio / Battery) Installation of Accessories Use of external MIC / Speaker 1. Remove accessory jack cover 2. Insert accessory jack 3.
Operation Guide The battery needs to be charged fully before using radio. The radio has a battery voltage icon to show on LCD screen. 1. Power On/Off: Rotate the power switch / volume control knob clockwise to switch power ON. When the click sound of switch and the melody is heard, the transceiver is powered on. Note: avoid outburst of sound harmful to ears. Rotate the Power switch/ volume control knob counterclockwise to switch power OFF.
Contents Guide 1. TSQ: TSQ selectable, there are four items as below: (factory setting is OFF) OFF: Turn off TSQ and LCD screen shows as below: DCS: Turn on DCS and LCD screen shows as below: CTCSS: Turn on CTCSS and LCD screen shows as below: T: Turn on Tone, during transmission. LCD screen shows “T” as below: LCD screen doesn’t show “T” during receiving. 11 Contents Guide 2. CTCSS: There are 51 codes of CTCSS as below table (factory setting is 1 (67.0Hz)) setting is 1 (67.0Hz)) 1 67.0 11 97.
Contents Guide Contents Guide 3. DCS: There are 81 codes of DCS as below table. (Factory setting is 023) 13 4.
Contents Guide 6. Mic Gain: Mic. Gain (Factory setting is Low) Adjust Mic. Gain to transmit a clear volume. Contents Guide 9. Scrambler: Scrambler (Factory setting is OFF) The radio sets 9 codes of scrambler to measure a radio signal securely. It can only be understand by someone who has special group at the same code. It can’t transmission and receiving without scrambler code. 7.
Contents Guide 12. TOT: Time-out timer (Factory setting is OFF) Choose 30/60/120/180 depending on your need. Turn off “TOT”, the radio will be continuous transmission. While turn on “TOT” and choose 30 sec., push and hold PTT if continuous talk exceeds 20 sec. and radio will send out a beep sound. At the same time, LCD screen shows “ ” flash, the radio will stop transmission at time-out. LCD screen shows【TOT】words as below: Contents Guide 16.
Contents Guide 18.
PK MINI46-E VER.