Instruction manual

Static/DHCP

Fig.26

Move cursor with

and on the front panel and select item with and .

 Mode: Could choose “Static” or “DHCP”. On “Static Address” status, IP Address, Net Mask, Default

Gateway and DNS should input by user self. On “DHCP” status, IP Address, Net Mask, and Multicast IP will

be obtained by system automatically.

 IP Address: Example 192.168.000.100. This IP address must not be conflicted with other IP.

 Net Mask: Example 255.255.255.000.

 Gateway Address: Example 192.168.000.001 (Modem/Router local address)

(If the Subnet Mask is set as above, then the first three levels of the IP address and the Gateway address must

be identical. Use the Gateway address first.)

 HTTP Port: Example 9998.

 Server Port and Server IP: If you set this IP and port, when there is alarm and exception happened, DVR

will send information to that host IP.

 Multicast IP: It is one D-class IP address, among 224.0.0.0 --- 239.255.255.255. If you do not use multicast

function, you do not need to set. Some routers will prohibit multicast function in case of network storm.