Instruction manual

In the course of setting up the parameters, if the parameters needed to be set the same in all channels, you can

select ‘ALL’ after finishing the setup of parameters of one channel. The system will prompt a dialog box.

When pressing ‘OK’, parameters setup for all channels will be achieved.

Note: “Sheltering” and “Video Loss” settings please refer to “Motion” setup.

Alarm Elimination

Click icon on the status bar to eliminate alarm if the alarm is activating.

Section 9 Playback/Backup

Playback

Press or in front panel to enter the search interface as show in Fig. 25

Fig. 25

Move cursor with

and on the front panel and select item with and .

 From：Set the starting time.