Instruction manual

32
Motion Detection/Video Lost/ Video Shelter Alarm Setting
Enter ‘Motion’ to set motion detection alarm
Fig. 24
 Channel：Select one channel for setting
 Motion：Select activate mode including: motion detection, video shelter and video lost.
 Sensitivity：Select sensitivity of motion detection or video shelter. Option including: Highest, High,
Medium, Low, Lowest.
 Area Setup：Alarm area should also be set to activate motion detection or video shelter though such function
was selected.
In area setup interface, full screen is the default alarm area. Use direction key to move cursor, press
to
cancel chose area, and press
to recover chose area.
 Relating：When alarm activated, relevant channel can be selected to record if recording period has been
setup in “Alarm Schedule” menu.
 Alarm Out： Activate alarm out or not.
 Schedule： Enter “Alarm Schedule” interface to setup alarm period in which system will activate relevant
disposal mode such as buzzer alarm, related channel full-screen display, alarm output, relevant channel
recording if alarm has triggered. Alarm schedule setting is the same as schedule recording setting, please
refer
Schedule Recording section.