Instruction manual

18
 Mouse Option
＊Modify Number Double-click mouse left key to input number or use trolley of mouse to modify
number directly.
＊Modify Character Double-click mouse left key to input character.
＊Modify Option Choose option with trolley of mouse or in the option box after left click.
＊Exit Menu Right click to exit menu step by step.
 Adjusting the Monitor views
＊Image Switch On display, move mouse cursor to bottom, status bar will reveal automatically,
then click
icon to switch image.
＊Full Screen Image On 4-screen, move mouse cursor to a channel, double-click mouse left key to
view Full screen, double-click again will back full screen to 4-screen.
Section 4 Input mode introduction
DVR support three input modes: number, capital and lowercase letter input. Press to get into input
interface on number input box or character edit box as shown in Fig. 9:
Fig. 9
In the input interface, “←” means “delete”, “Shift” means “uppercase or lowercase letter input switch”. Press
“ESC” in the front panel to save and exit.