Model: 20LDVD05 20” 4:3 Digital LCD Television with DVD Player Operating Manual http://wintal.com.au Manual 20LDVD05.
Manual 20LDVD05.
TABLE OF CONTENTS 1. PreFace 1 2. Safety Precautions 1 3. Front, Back Connections 2 4. TV Installation 4 4.1 Connecting Antennas 4 4.2 AV Video Input 4 4.3 S-Video Input 4 4.4 YCbCr Input 5 4.5 PC (VGA) Connection 5 5. 6 5.1 Auto Search 6 5.2 Manual Search 6 5.3 Fine Tune 6 5.4 Save Settings 6 5.5 Skip 6 6. Picture Setting 7 7. Audio Setting 7 8. Source Setting 7 9. Language Select 8 10. Lock 8 11. Reset 8 12. Blue Background 8 13.
1. PREFACE Congratulations on your purchase of a Wintal LCD! Please read this manual thoroughly before operating the monitor. Make sure the monitor was not damaged in transit. Should the monitor be damaged, do not install it and contact your dealer. Check that you have all the accessories according to the model. 2. SAFETY PRECAUTIONS Place the Monitor on a stable surface. Do not use the monitor with other fixations than those provided or suggested by the manufacturer.
3. FRONT, BACK CONNECTIONS Front View and Controls Back View Back Connections Wintal LCD | 2 Manual 20LDVD05.
Side View DVD Player Controls 1. : PLAY 2. : PAUSE 3. : STOP 4. : NEXT TRACK 5. : PREVIOUS TRACK 6. : EJECT 3 | Wintal LCD Manual 20LDVD05.
4. TV INSTALLATION 4.1 Connecting Antennas To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection. After installation, insertv the 75Ω antenna plug into the antenna jack as shown. 4.2 AV Video Input 4.3 S-Video Input Wintal LCD | 4 Manual 20LDVD05.
4.4 YCbCr Input *To connect to your source component terminal, use the supplied “S-Video to 3x RCA” adaptor. 4.5 PC (VGA) Connection 5 | Wintal LCD Manual 20LDVD05.
5. SETTING UP YOUR LCD 5.1 Auto Search • • • • • Press «MENU» key on the front control panel or «SYS MENU» key on the remote control to go into the menu Then press ◄ or ► to access the menu below Before selecting «Auto search», choose the «Colour system» and the «Sound system» with ▲ or ▼ Select « Auto search » with ▲ or ▼ Press ◄ or ► to confirm 5.
• • 6. • • • • 7. • • • • 8.
9. • • • • 10.
14. PC SETTING • • • Set up the LCD to PC mode by changing the «MODE» key on remote control Switch on PC with a contrast ratio 800*600 /60Hz Connect the LCD to the PC with the VGA cable • Press «MENU» key on the front panel or «SYS MENU» on the remote control to go into the menu Press ◄ or ► to access the menu above Press ▲ or ▼ to select the setting you wish to adjust Adjust with ◄ or ► • • • 9 | Wintal LCD Manual 20LDVD05.
15. TV / DVD COMBO REMOTE CONTROL 4 3 1 WE PO R SLEEP MUTE MODE 2 EJECT 1 2 a 3 PAUSE 5 4 5 6 7 8 9 b STOP 7 9 BACK -/-- c SYS MENU 0 CH+ PICTURE AUDIO d e i m q h l p VOL - VOL + RESUME MENU SEARCH TITLE CH- SETUP DISPLAY SUBTITLE ZOOM CLEAN BOOKMARK PBC ANGLE REP SLOW 10 12 ENTER 11 8 6 LANGUAGE A-B t 13 g k o s v u f j n r w 20LDVD05 15.
15.2 Remote Control Instructions in DVD Mode a b c e f d g i j h k m n l o q r p s u t v w 16. a. b. c.
17. ACCESSORIES Included with your Wintal LCD are the following accessories: 1. 2. 3. 4. 5. 18. AC/DC Power Adapter One Remote Control 2x 1.5V “AA” batteries One User Manual AV Cable DVD OPERATION INSTRUCTIONS 18.1 DVD Console Operation 1. 2. Press DISPLAY to bring up the Console Menu. The Console function is only available in DVD/DVD Audio/ DVD-VR/ VCD discs, and the display result may differ among these disc types. DVD-VR Console Wintal LCD | 12 Manual 20LDVD05.
18.2 DVD System Setup Menu 1. 2. Press < SETUP > key until the screen displays as photo 1. Press ◄ key or ► key to select LANGUAGE -- DISPLAY - AUDIO LOCK - OTHERS menu setting. 18.3 DVD Language Setup 1. 2. 3. 4. Press < SETUP > key until the screen displays as photo 2 Press ▼ key to selecting Menu Language –Disc Audio –Disc Subtitle- Disc Menu setting. Press ► key to adjust. Press < Enter > to confirm the selection. Photo 2 18.4DVD Display Setup 1. 2. 3. 4.
Photo 3 TV Aspect: Depending on the type of television you have, the image adjustment offers 2 options for your setting: 4:3 and 16:9. This item is used to display image data in the wide-screen film on the normal TV set. The option 16:9 is used when the DVD player is connected to wide screen TV in Full Mode, and the screen will display pictures in full size. Display Mode item can only be modified when the TV Display mode is set to 4:3. Two options are provided: Letterbox and Panscan.
1. Dolby Digital indicates the output mode of the Dolby Digital. Two options are provided: Bitstream and PCM 2. DTS indicates the output mode of the Digital Cinema. Two options are provided: Bitstream and PCM. a. BITSTREAM: Select this option when the unit is connected to an amplifier with a built–in DTS decoder, Dolby Digital decoder and MPEG decoder, or other audio equipment with digital audio output terminals. b.
Rating item is used to set the rating level. Before you enter into the item, the system will request you to input the password first. After the password is entered correctly, the parental control rating level can be changed. If you didn’t set any password of Parental Control, the system will request you to input a new password. If you make a mistake before pressing ENTER, press CLEAR and enter your 4-digit password again.
18.7 “Others” Settings a. b. c. d. Press < SETUP > key until the screen displays as photo 5. Press ▼ key to selecting PBC - Auto Play – B.L.E. –Load Default – Screen Saver – Last player Menu setting. Press ► key to adjust. Press < Enter > to confirm the selection. PHOTO 5 1. PBC item provides 2 options: ON and OFF. Please refer to the section VCD / SVCD PBC Menu for the respective descriptions of ON and OFF option of the PBC function. 2. Auto Play item provides 2 options: ON and OFF.
19. TROUBLESHOOTING Before calling our Service Centre, please check if you can troubleshoot the problem by yourself. Manual 20LDVD05.indd Sec1:18 Troubleshooting Control No signal Please check that all cables and connectors are correctly plugged in.
20. SPECIFICATIONS Screen Size 20.1 Inch Display Type LCD TFT Resolution (Pixel) 800 x 600 Brightness 500 cd / m² Colour 24 bit ( 16,777,216) Contrast Ratio 500 : 1 View Angle (H/V) Horizontal 160, Vertical 140, CR10 Aspect Ratio 4:3 Power 100-240 VAC, 12V 50/60HZ. Power consumption 80W TV System PAL / NTSC Video Input Format PAL / NTSC Antenna Input Standard antenna socket 75Ω Audio Output L / R 3W + 3W VGA Input 800 x 600 60HZ Input Output RGB 0.
Manual 20LDVD05.
