Service manual

6 ‘0’ - ‘7’ ASCII numbers 0 to 7, 30 hex to 37 hex.
• Bit 0 = Postal Sort Mark, Ink Mark, Kick Mark, Envelope Mark
• Bit 1 = Divert by Read Mark, Divert by Read Errors
• Bit 2 = Pack Valid, Good Pack
7 CR ASCII Carriage Return, OD hex.
Notes:
• Package Page Count —- Count 0 to 9 pages.(> 9, 3A hex, 3B hex etc..)
• 10 pages = 3A hex 11 pages = 3B hex = ‘;’, etc through the
ASCII chart.
There is no acknowledge or response from the Inserter
8) Friedberg 1 Protocol:
Character Data Description
1 0x2 2 hex.
2 ‘0’ ASCII number 0, 30 hex.
3 ‘0’ ASCII number 0, 30 hex
4 ‘0’ — `9’ ASCII numbers 0 to 9, 30 hex to 39 hex.
• Package Page Count— 10’s digit
5 ‘0’ — ‘9’ ASCII numbers 0 to 9, 30 hex to 39 hex.
• Package Page Count - 1’s digit
6 ‘0’ - ‘7’ ASCII numbers 0 to 7, 30 hex to 37 hex.
• Bit 0 = Station 1
• Bit 1 = Station 2
• Bit 2 = Station 3
7 ‘0’ - ‘7’ ASCII numbers 0 to 7, 30 hex to 37 hex..
• Bit 0 = Station 4
• Bit 1 = Station 5
• Bit 2 = Station 6
8 ‘0’ – ‘7’ ASCII numbers 0 to 7, 30 hex to 37 hex.
• Bit 0 = Station 7
• Bit 1 = Station 8
• Bit 2 = Station 9
9 ‘0’ – ‘7’ ASCII numbers 0 to 7, 30 hex to 37 hex.
• Bit 0 = Postal Sort Mark, Ink Mark, Kick Mark, Envelope Mark
• Bit 1 = Divert by Read Mark, Divert by Read Errors
• Bit 2 = Pack NOT Valid, BAD Pack
10 CR ASCII Carriage Return, 0D hex.
9) General 2 Protocol:
Character Data Description
1 ‘0’ - ‘7’ ASCII numbers 0 to 7, 30 hex to 37 hex.
• Bit 0 = Station 1
• Bit 1 = Station 2
• Bit 2 = Station 3
2 ‘0’ — ‘7’ ASCII numbers 0 to 7, 30 hex to 37 hex,
• Bit 0 = Station 4
• Bit 1 = Station 5
• Bit 2 = Station 6
420T V6LT OPERATOR & SERVICE MANUAL ISSUE 2009/06 Rev. 6/21/2011 SECTION A – PAGE 70
071-33370-400
INTRODUCTION