Service manual

• Enter Meter “OFF AT:’ in degrees, 0 to 350. Before 90 degrees.
• Enter Meter Position ‘STA:
• 1 to 12 after envelope insert station.
• ‘0’ to Disable this meter.
• Enter Point Option ‘PT:’
• 9 = Postal Meter Divert - DEFAULT
• 10 = Postal Meter Divert - Inverted Signal
Inserter Setup 3:
Postal Meter 2:
• Enter Meter “ON AT:’ in degrees, 0 to 350. After 90 degrees.
• Enter Meter “OFF AT:’ in degrees, 0 to 350. Before 90 degrees.
• Enter Meter Position ‘STA:
• 1 to 12 after envelope insert station.
• ‘0’ to Disable this meter.
• Enter Meter Output Point Option ‘PT:’
• 1 = Station 7 Select - DEFAULT
• 2 = Station 8 Select
• 3 = Inserter E-Stop
• 4 = Station 1 Error
• 5 = Station 7 Select - Inverted Signal
• 6 = Station 8 Select - Inverted Signal
• 7 = Inserter E-Stop - Inverted Signal
• 8 = Station 1 Error - Inverted Signal
• 9 = Postal Meter Divert. DO NOT USE.
• 10 = Inverted Postal Meter Divert. DO NOT USE.
• 11 = Moistener
• 12 = Moistener - Inverted
Postal Meter 3:
• Enter Meter “ON AT:’ in degrees, 0 to 350. After 90 degrees.
• Enter Meter “OFF AT:’ in degrees, 0 to 350. Before 90 degrees.
• Enter Meter Position ‘STA:
• 1 to 12 after envelope insert station.
• ‘0’ to Disable this meter.
• Enter Meter Output Point Option ‘PT:’
• 1 = Station 7 Select
• 2 = Station 8 Select - DEFAULT
• 3 = Inserter E-Stop
• 4 = Station 1 Error
• 5 = Station 7 Select - Inverted Signal
• 6 = Station 8 Select - Inverted Signal
• 7 = Inserter E-Stop - Inverted Signal
• 8 = Station 1 Error - Inverted Signal
• 9 = Postal Meter Divert. DO NOT USE.
• 10 = Inverted Postal Meter Divert. DO NOT USE.
• 11 = Moistener
• 12 = Moistener - Inverted
Postal Meter Weights :
• Meter 1 to 2 Weight Value(00000 to 60000)
• Meter 2 to 3 Weight Value(00000 to 60000)
Weight Page and Envelope:
• Enter Page Weight Value(00000 to 60000)
• Enter Envelope Weight Value(00000 to 60000)
Weight Inserts 1 2 3 4
• Enter Insert >1 Weight Value(00000 to 60000)
• Enter Insert >2 Weight Value(00000 to 60000)
• Enter Insert >3 Weight Value(00000 to 60000)
• Enter Insert >4 Weight Value(00000 to 60000)
Weight Inserts 5 6 7 8
• Enter Insert >5 Weight Value(00000 to 60000)
• Enter Insert >6 Weight Value(00000 to 60000)
• Enter Insert >7 Weight Value(00000 to 60000)
• Enter Insert >8 Weight Value(00000 to 60000)
INTRODUCTION
420T V6LT OPERATOR & SERVICE MANUAL ISSUE 2009/06 Rev. 6/21/2011 SECTION A – PAGE 61
071-33370-400