Service manual

Purpose - Identify each individual page within a package. The sequential
incrementing of the number ensures the documents are assembled in the
proper order.
Page Up - Min to Max within sets.
Page Down - Max to Min within sets.
Roll Up – Min to Max to Min across sets
Roll Down – Max to Min to Max across sets
Total Up - (A-Z) Supports “Total Page” demand feed option.
Total Dn - (Z-A)
None
Min (0 to 1)
Max (0 to 999)
Count Skip
Ink Mark
• Mark to drive an ink/zip mark mechanism downstream.
Meter Divert
• Mark to drive a divert mark mechanism downstream.
Subset Mark (NA)
UnSeal Mark
Stitch Mark
Seq (Sequence) Shutdown
Usage - This location is used to maintain an even number of solid marks
within a code.
Note: The fields that are marked Optional can be eliminated by operator
configuration of the machine. However, when a data field is eliminated
package security and integrity suffers.
Bit Direction
Normal - :
Count bits 5 to 1, left to right, bit position 4 to 0, follow standard bit position
of character.
Reverse - :
Count bits 1 to 5, left to right, bit position 4 to 0.(B&H)
Normal – A:
For multiple character numeric values. For 5 numeric characters converted
to a number, bit positions 16 to 1: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024,
2048, 4096, 8192, 16384, 32768.
Reverse – A:
For multiple character numeric values. For 5 numeric characters converted
to a number, bit positions 1 to 16: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024,
2048, 4096, 8192, 16384, 32768.
Bit Number:
Establishes the maximum number of bits in one character. This is
determined by the type of code being used.
Select from 5 through 8:
• 5 3 of 9 Bar Code
• 6-8 not used at this time
420T V6LT OPERATOR & SERVICE MANUAL ISSUE 2009/06 Rev. 6/21/2011 SECTION A – PAGE 56
071-33370-400
INTRODUCTION