Service manual

Enter the weight of each insert in stations 1-6 and stations 7-12
A.6m Inserter Setup 4
Pause Degree:
Pause Type: Switch or Degree
• The defaults of On Degree are:
0 (0 to 999) On Deg 330
1 (1000 to 1999) On Deg 330
2 (2000 to 2999) On Deg 310
3 (3000 to 3999) On Deg 290
4 (4000 to 4999) On Deg 270
5 (5000 to 5999) On Deg 250
6 (6000 to 6999) On Deg 230
7 (7000 to 7999) On Deg 210
8 (8000 to 8999) On Deg 190
9 (9000 to 9999) On Deg 170
10 (10000+) On Deg 150
In Track Check – Time: 180
• This refers to the InserterStation1/InserterOpenFeed/InserterIntrack
sensor. At 180 degrees(or where you set this value in InserterSetup4)
the pack is sensed in the track. If the pack is there it moves ahead and is
processed for selects and envelopes. If it is not there the selects and
envelopes are erased.
• Refer to Section D.4 for an example of a Typical Postal Metering Setup
Preset.
Inserter Monitor:
• Displays inserter event activity.
INTRODUCTION
420T V6LT OPERATOR & SERVICE MANUAL ISSUE 2009/06 Rev. 6/21/2011 SECTION A – PAGE 43
071-33370-400