Service manual

A.6 SETUP SCREENS
Note: The exact screens and functionality are software version dependent.
Specific features may be available or not, or have default settings according
to the software version.
Press Setup while in the Run screen.
This screen provides access to all 420T setup screens.
Press Run to return to the “Run” screen.
Note: Normal factory settings are in bold font.
A.6a System Setup
Package Count “Reset”:
• Resets total package count (“Packages”) found in Run screen. This
value will also reset automatically on power down of machine.
Total Sheets “Reset”:
• Resets total sheets count found in the Run Screen. This value will also
reset automatically on power down of machine.
Batch Process “Reset” (On/Off status is also displayed):
Resets the “Total Sheets” or “Total Packs” found in the Run screen
depending on which option was selected. This value will also reset
automatically after the sequential stop determined by the batch size entered.
A sequential stop occurs when the last pack is accumulated, the machine
INTRODUCTION
420T V6LT OPERATOR & SERVICE MANUAL ISSUE 2009/06 Rev. 6/21/2011 SECTION A – PAGE 29
071-33370-400