Service manual

F.5 Typical Postal Metering Setup Presets
The following are ‘Typical Presets’ for the 438 configured for 6-Station
AC/DC Open Feed Inserter Control with two postal meters, Meter 2 and
Meter 3, Meter 1 and Meter 2. This may vary from your actual application.
Test - “Setup”
• Double Detect ON
• resets Reset NA
• ower Left Display OMR
• ower Right Display OMR
• o Use Timeout OFF
• Pulse Feed ON
• Type of Transfer OPEN FEED
• Beep/Bell ON
• Input Conveyor 2000 Sheet Conveyor
• High Count Stop 07
• Performance Off
• Inserter Online/Offline Online
• First Page Hold delay 30
• Config ID Xfer Conveyor(W/Inserter)
• Dump to Feed Delay Setup 05
• Dump Delay Timer Setup 25
Test - “Inserter”:
Insert Vacuum Enable On at:100
Envelope Hopper Vacuum On at:230
Insert Sta.-:2:
Envelope Flap Detect On at:010
Off at:350
Insert Sta.-:1:
Ink Marking:
On at:010
Off at:010
Insert Sta.:00:
Postal Meter Divert:
On at:200 (First Meter inline when Meters 1 and 2 tested)
Off at:010
Insert Sta.:07
Logical Shift Enable at:090
Bad Package Stop Enable at:080
Number of Insert Stations 6
Number of Empty Stations 2
Encoder Type GBR 100 Tick Encoder
Opto Logic Type AC/DC Dumb Inserter
Postal Meter 2:
On at:200(for first Meter inline, 240 if second meter inline)
Off at:010
Insert Sta.:07
Pt:1
Postal Meter 3:
On at:200(for first Meter inline, 240 if second meter inline)
Off at:010
Insert Sta.:07
Pt:2
Postal Meter Weights:
Meter 1 to 2: 00004 Meter 2 to 3: 00005
Weight Page and Envelope:
Page: 00001 Envelope: 00001 >: 00001 >:00001 >: 00001
Weight Inserts 1 2 3 4:
>: 00001 >: 00001 >: 00001 >: 00001
Weight Inserts 5 6 7 8:
>: 00001 >: 00001 >: 00001 >: 00001
MISCELLANEOUS
420T V6LT OPERATOR & SERVICE MANUAL ISSUE 2009/06 Rev. 6/21/2011 SECTION F – PAGE 141
071-33370-400