Service manual

0 = disable; 1 = enable
Bit 3 – inserter station 3 select 0 to 1
0 = disable; 1 = enable
Bit 4 – inserter station 4 select 0 to 1
0 = disable; 1 = enable
Bit 5 – inserter station 5 select 0 to 1
0 = disable; 1 = enable
1 B2 – Second set of Bit Fields 0 to 31
Bit 1 – inserter station 6 select 0 to 1
0 = disable; 1 = enable
Bit 2 – ink/postal mark 0 to 1
0 = disable; 1 = enable
Bit 3 – not used 0 to 1
Bit 4 – not used 0 to 1
Bit 5 – not used 0 to 1
16 Customer ID – A 16 char. unique identity. A to Z , 0 to 9
—-
22 Chars
GBR420 Setups for General Barcode Spec 3 -2D
SYSTEM SETUP
Reader Type Bar
BARREAD SETUP
Job Number=5 Bar User Setup 1
BARREAD SETUP1
Demand Feed Normal
Group Seq Up
Group Seq Min=1 Max=99
Page Seq Page Up
Page Seq Min=1 Max=9 Count Skip=1
Ink Mark Off
Meter Divert Off
Subset Mark Off
UnSeal Mark Off
UnSeal Mark Off
Seq. ShutDn Typ None
Bit Direction Normal.
Bit Number 5
BARREAD SETUP2
Group Seq Code Start=2 Length=2
Start_Bit=0 Length_Bit=0 Inc Type=0
Page Seq Code Start=4 Length=1
Start_Bit=0 Length_Bit=0
Inserts Code Start=5 Length=2
Start_Bit=1 Length_Bit=6
Dmd Feed Code Start=1 Length=1 Start_Bit=1
Ink Mark Code Start=6 Length=1 Start_Bit=2
420T V6LT OPERATOR & SERVICE MANUAL ISSUE 2009/06 Rev. 6/21/2011 SECTION C – PAGE 114
071-33370-400
PROBLEM ANALYSIS