Specifications

080505 OPERATIONS MANUAL PPM-GX500 19
Available Options (Drive Conguration)
IDE BIOS Support
[Enabled] – must be enabled to boot from IDE
devices
[Disabled] – disables BIOS support for IDE devices
DMA/UDMA support in BIOS
[Enabled], [Disabled]
– enables/disables BIOS setup of DMA/UDMA
timings
Max PIO/MDMA/UDMA
mode for Drive 1 (Drive 2)
[Auto] - Allow BIOS to determine maximum
timings for IDE devices
[PIO 0] - Override to maximum PIO Mode 0
[PIO 1] - Override to maximum PIO Mode 1
[PIO 2] - Override to maximum PIO Mode 2
[PIO 3] - Override to maximum PIO Mode 3
[PIO 4] - Override to maximum PIO Mode 4
[MDMA 0]-Override to maximum Multi-word DMA 0
[MDMA 1]-Override to maximum Multi-word DMA 1
[MDMA 2]-Override to maximum Multi-word DMA 2
[UDMA 0] - Override to maximum Ultra-DMA 0
[UDMA 1] - Override to maximum Ultra-DMA 1
[UDMA 2] - Override to maximum Ultra-DMA 2
[UDMA 3] - Override to maximum Ultra-DMA 3
[UDMA 4] - Override to maximum Ultra-DMA 4
CD-ROM Boot
[Enabled], [Disabled]
– enables or disables CD-ROM Boot and USB Boot
Boot Order Conguration
[None], [Floppy Disk], [Hard Drive #1], [CD-ROM
Drive]
A – Drive Conguration: congures hard drive and oppy devices