Specifications
Table Of Contents
- Home
- Table of Contents
- 1 General Information 1-1
- 2 EBC-BX Technical Reference 2-1
- 2.1 Introduction 2-1
- 2.2 Intel FW82443BX / SMSC Victory-66 Chipset 2-1
- 2.3 Memory Installation 2-1
- 2.4 Interrupt Routing 2-2
- 2.5 Power/Reset Connections 2-3
- 2.6 Mouse Interface 2-3
- 2.7 Real Time Clock/Calendar 2-4
- 2.8 Keyboard Interface 2-4
- 2.9 Serial Interface 2-5
- 2.10 Parallel Printer Port 2-12
- 2.11 Speaker/Sound Interface 2-12
- 2.12 PC/104 Bus Interface 2-12
- 2.13 PC/104 Plus Bus Interface 2-13
- 2.14 Floppy Disk Interface 2-14
- 2.15 IDE Hard Disk Interface 2-15
- 2.16 Watchdog Timer Configuration 2-16
- 2.17 Status LED 2-16
- 2.18 Battery Select Control 2-16
- 2.19 DiskOnChip Configuration 2-17
- 2.20 Parallel I/O 2-18
- 2.21 VGA Configuration 2-21
- 2.22 Ethernet Controller 2-23
- 2.23 Fan Power Connector 2-24
- 2.24 Multi I/O Connector 2-25
- 2.25 USB Connector 2-25
- 2.26 Jumper Connector Summary 2-26
- 3 AWARD BIOS Configuration 3-1
- 3.1 General Information 3-1
- 3.2 Entering Setup 3-1
- 3.3 Setup Main Menu 3-1
- 3.4 Standard CMOS Features 3-2
- 3.5 Advanced BIOS Features Setup 3-6
- 3.6 Chipset Features Setup 3-11
- 3.7 Integrated Peripherals Setup 3-14
- 3.8 Power Management Setup 3-19
- 3.9 PNP/PCI Configuration 3-23
- 3.10 PC Health Status 3-25
- 3.11 Frequency/Voltage Control 3-25
- 3.12 Load BIOS Defaults 3-26
- 3.13 Set Supervisor Password 3-27
- 3.14 Set User Password 3-27
- 3.15 Save and Exit Setup 3-27
- 3.16 Exit without Saving 3-27
- 4 EBC-BX DiskOnChip Configuration 4-1
- 5 WS16C48 Programming Reference 5-1
- APPENDIX A I/O Port Map
- APPENDIX B Interrupt Map
- APPENDIX C EBC-BX Parts Placement Guide
- APPENDIX D EBC-BX Parts List
- APPENDIX E EBC-BX Mechanical Drawing
- APPENDIX F WS16C48 I/O Routines and Sample Program Listings
- Warranty and Repair Information
2.24 Multi I/O Con nec tor
The I/O to the pri mary se rial chan nels, the printer port, and key board are all ter mi nated via the con -
nec tor at J2. An adapter ca ble, part number CBL- 247-1, is avail able from Win Sys tems to adapt to the
con ven tional I/O con nec tors. The pin defi ni tions for J2 are shown here
2.25 USB Con nec tor
A USB cable may be attached via the connector at J11. An adapter cable, CBL-249-1 is available
from WinSystems to adapt to a conventional USB port. The pinout for J11 is shown here.
030923 OPERATIONS MANUAL EBC-BX Page 2 - 25
WinSystems - "The Embedded Systems Authority"
1 o o 2
3 o o 4
5 o o 6
7 o o 8
9 o o 10
11 o o 12
13 o o 14
15 o o 16
17 o o 18
19 o o 20
21 o o 22
23 o o 24
25 o o 26
27 o o 28
29 o o 30
31 o o 32
33 o o 34
35 o o 36
37 o o 38
39 o o 40
41 o o 42
43 o o 44
45 o o 46
47 o o 48
49 o o 50
COM1 - DCD
COM1 - RXD
COM1 - TXD
COM1 - DTR
COM1 - GND
COM2 - DSR
COM2 - RTS
COM2 - CTS
COM2 - RI
LPT - STROBE
LPT - PD0
LPT - PD1
LPT - PD2
LPT - PD3
LPT - PD4
LPT - PD5
LPT - PD6
LPT - PD7
LPT - ACK
LPT - BUSY
LPT - PE
LPT - SLCT
KEYBD - GND
KEYBD - KDATA
KEYBD - +5V
COM1 - DSR
COM1 - RTS
COM1 - CTS
COM1 - RI
COM2 - DCD
COM2 - RSX
COM2 - TXD
COM2 - DTR
COM2 - GND
LPT - AUTOFD
LPT - ERROR
LPT - INIT
LPT - SLCTIN
LPT - GND
LPT - GND
LPT - GND
LPT - GND
LPT - GND
LPT - GND
LPT - GND
LPT - GND
KEYBD - GND
KEYBD - GND
KEYBD - CLK
KEYBD - +5V
J2
1 o
2 o
3 o
4 o
J11
USBV0
D0-
D0+
USBG0