Specifications
Table Of Contents
- Home
- Table of Contents
- 1 General Information 1-1
- 2 EBC-BX Technical Reference 2-1
- 2.1 Introduction 2-1
- 2.2 Intel FW82443BX / SMSC Victory-66 Chipset 2-1
- 2.3 Memory Installation 2-1
- 2.4 Interrupt Routing 2-2
- 2.5 Power/Reset Connections 2-3
- 2.6 Mouse Interface 2-3
- 2.7 Real Time Clock/Calendar 2-4
- 2.8 Keyboard Interface 2-4
- 2.9 Serial Interface 2-5
- 2.10 Parallel Printer Port 2-12
- 2.11 Speaker/Sound Interface 2-12
- 2.12 PC/104 Bus Interface 2-12
- 2.13 PC/104 Plus Bus Interface 2-13
- 2.14 Floppy Disk Interface 2-14
- 2.15 IDE Hard Disk Interface 2-15
- 2.16 Watchdog Timer Configuration 2-16
- 2.17 Status LED 2-16
- 2.18 Battery Select Control 2-16
- 2.19 DiskOnChip Configuration 2-17
- 2.20 Parallel I/O 2-18
- 2.21 VGA Configuration 2-21
- 2.22 Ethernet Controller 2-23
- 2.23 Fan Power Connector 2-24
- 2.24 Multi I/O Connector 2-25
- 2.25 USB Connector 2-25
- 2.26 Jumper Connector Summary 2-26
- 3 AWARD BIOS Configuration 3-1
- 3.1 General Information 3-1
- 3.2 Entering Setup 3-1
- 3.3 Setup Main Menu 3-1
- 3.4 Standard CMOS Features 3-2
- 3.5 Advanced BIOS Features Setup 3-6
- 3.6 Chipset Features Setup 3-11
- 3.7 Integrated Peripherals Setup 3-14
- 3.8 Power Management Setup 3-19
- 3.9 PNP/PCI Configuration 3-23
- 3.10 PC Health Status 3-25
- 3.11 Frequency/Voltage Control 3-25
- 3.12 Load BIOS Defaults 3-26
- 3.13 Set Supervisor Password 3-27
- 3.14 Set User Password 3-27
- 3.15 Save and Exit Setup 3-27
- 3.16 Exit without Saving 3-27
- 4 EBC-BX DiskOnChip Configuration 4-1
- 5 WS16C48 Programming Reference 5-1
- APPENDIX A I/O Port Map
- APPENDIX B Interrupt Map
- APPENDIX C EBC-BX Parts Placement Guide
- APPENDIX D EBC-BX Parts List
- APPENDIX E EBC-BX Mechanical Drawing
- APPENDIX F WS16C48 I/O Routines and Sample Program Listings
- Warranty and Repair Information
J22
Pin A B C D
1 GND/5.0 KEY Re served +5 AD00
2 VI/O AD02 AD01 +5V
3 AD05 GND AD04 AD03
4 C/BE0* AD07 GND AD06
5 GND AD09 AD08 GND
6 AD11 VI/O AD10 M66EN
7 AD14 AD13 GND AD06
8 +3.3V C/BE1* AD15 +3.3V
9 SERR* GND SB0* PAR
10 GND PERR* +3.3V SDONE
11 STOP* +3.3V LOCK* GND
12 +3.3V TRDY* GND DEVSEL*
13 FRAME* GND IRDY* +3.3V
14 GND AD16 +3.3.V
C/BE3*
15 AD18 +3.3V AD17 GND
16 AD21 AD20 GND AD19
17 +3.3V AD23 AD22 +3.3V
18 ID SEL0 GND ID SEL1 ID SEL2
19 AD24 C/BE3* VI/O ID SEL3
20 GND AD26 AD25 GND
21 AD29 +5V AD28 AD27
22 +5V AD30 GND AD31
23 REQ0* GND REQ1* VI/O
24 GND REQ2* +5V GNT0*
25 GNT1* VI/O GNT2* GND
26 +5V CLK0 GND CLK1
27 CLK2 +5V CLK3 GND
28 GND INTD* +5V RST*
29 +12V INTA* INTB* INTC*
30 -12V Re served Re served GND/3.3V KEY
2.14 Floppy Disk In ter face
The EBC- BX sup ports up to 2 stan dard 3 1/2" or 5 1/4" PC com pati ble floppy disk drives. The
drives are con nected via the I/O con nec tor at J10. Note that the in ter con nect ca ble to the drives is a stan -
dard floppy I/O ca ble used on desk top PCs. The ca ble must have the twisted sec tion prior to the drive A
po si tion. The pin defi ni tions for the J10 con nec tor are shown on the fol low ing page:
Page 2 - 14 OPERATIONS MANUAL EBC-BX 030923
WinSystems - "The Embedded Systems Authority"