Specifications
Table Of Contents
- Home
- Table of Contents
- 1 General Information 1-1
- 2 EBC-BX Technical Reference 2-1
- 2.1 Introduction 2-1
- 2.2 Intel FW82443BX / SMSC Victory-66 Chipset 2-1
- 2.3 Memory Installation 2-1
- 2.4 Interrupt Routing 2-2
- 2.5 Power/Reset Connections 2-3
- 2.6 Mouse Interface 2-3
- 2.7 Real Time Clock/Calendar 2-4
- 2.8 Keyboard Interface 2-4
- 2.9 Serial Interface 2-5
- 2.10 Parallel Printer Port 2-12
- 2.11 Speaker/Sound Interface 2-12
- 2.12 PC/104 Bus Interface 2-12
- 2.13 PC/104 Plus Bus Interface 2-13
- 2.14 Floppy Disk Interface 2-14
- 2.15 IDE Hard Disk Interface 2-15
- 2.16 Watchdog Timer Configuration 2-16
- 2.17 Status LED 2-16
- 2.18 Battery Select Control 2-16
- 2.19 DiskOnChip Configuration 2-17
- 2.20 Parallel I/O 2-18
- 2.21 VGA Configuration 2-21
- 2.22 Ethernet Controller 2-23
- 2.23 Fan Power Connector 2-24
- 2.24 Multi I/O Connector 2-25
- 2.25 USB Connector 2-25
- 2.26 Jumper Connector Summary 2-26
- 3 AWARD BIOS Configuration 3-1
- 3.1 General Information 3-1
- 3.2 Entering Setup 3-1
- 3.3 Setup Main Menu 3-1
- 3.4 Standard CMOS Features 3-2
- 3.5 Advanced BIOS Features Setup 3-6
- 3.6 Chipset Features Setup 3-11
- 3.7 Integrated Peripherals Setup 3-14
- 3.8 Power Management Setup 3-19
- 3.9 PNP/PCI Configuration 3-23
- 3.10 PC Health Status 3-25
- 3.11 Frequency/Voltage Control 3-25
- 3.12 Load BIOS Defaults 3-26
- 3.13 Set Supervisor Password 3-27
- 3.14 Set User Password 3-27
- 3.15 Save and Exit Setup 3-27
- 3.16 Exit without Saving 3-27
- 4 EBC-BX DiskOnChip Configuration 4-1
- 5 WS16C48 Programming Reference 5-1
- APPENDIX A I/O Port Map
- APPENDIX B Interrupt Map
- APPENDIX C EBC-BX Parts Placement Guide
- APPENDIX D EBC-BX Parts List
- APPENDIX E EBC-BX Mechanical Drawing
- APPENDIX F WS16C48 I/O Routines and Sample Program Listings
- Warranty and Repair Information
The two pri mary se rial ports, COM1 and COM2 are con fig ur able for RS- 422, RS- 485 or J1708,
with the ad di tion of op tional driver ICs (Win Sys tems P/N CK-75176-2). The con figu ra tion op tions for
each of the sup ported modes are shown on the fol low ing pages. Con nec tion to COM1 and COM2 is
made through the Multi-I/O con nec tor at J2. An adapter ca ble (P/N CBL- 247-1) is avail able from Win -
Sys tems to adapt to stan dard DB9 con nec tors.
COM1 - RS- 232
COM2 - RS- 232
Page 2 - 6 OPERATIONS MANUAL EBC-BX 030923
WinSystems - "The Embedded Systems Authority"
3 2 1
o o o
1 2 3
o o o
U4 - In stalled
U9 - Not In stalled
U5 - Not In stalled
1 o o 6
2 o o 7
3 o o 8
4 o o 9
5 o
J15 J17
COM1 DB9
CD
RX Data
TX Data
DTR
GND
DSR
RTS
CTS
RI
3 2 1
o o o
1 2 3
o o o
U6 - In stalled
U10 - Not In stalled
U7 - Not In stalled
J19 J22
COM2 DB9
CD
RX Data
TX Data
DTR
GND
DSR
RTS
CTS
RI
1 o o 6
2 o o 7
3 o o 8
4 o o 9
5 o