Instruction manual

Clear-Com Communication Systems
ICS 92/52 Intercom Panel Instruction Manual
3-3
1. Adjust the “Page Volume” control of the panel using the
configuration program (refer to the PGM-WIN System Configuration
Manual).
2. Check the panel’s configuration to see if page override is enabled.
Announce tones (eavesdropping indication, change tones, etc.)
aren’t heard at the panel.
1. Check the panel’s Configuration menu to see if the monitoring tones
and change tones are enabled.
Accessory panel keys do not function.
1. Check the accessory panel’s connection on the panel’s rear panel.
2. Ensure the external AC power transformers are correctly connected
to the accessory panels.
3. Check the configuration program to ensure the correct number of
keys are configured.
BILL OF MATERIALS
MISCELLANEOUS
Device Description Part #
CABLE 10-PIN FLAT CABLE 770011
CABLE 16-PIN FLAT CABLE (SPLIT 770010
CABLE 34-PIN FLAT CABLE 730181
CLAMP CABLE CLAMP, 3/16IN
PLASTIC640054
FLASH ROM ICS-92 PROGRAM 710414
SPEAKER 41 X 71MM, SMALL MAGNET500138
TRANSFORMERPOWER PLUG-IN 117/14VAC 400008
TRANSFORMERPOWER PLUG-IN 220/14VAC 400011