ASSEMBLY INSTRUCTIONS Part # Description QTY A Back Panel 1 B Right Arm 1 C Left Arm 1 D Seat Panel 1 E Bolt 2 Bolt 8 F Figure M6*50 M6*15 G Washer 10 H Hex Key 1 ASSEMBLY TIPS: Please use the hardware and accessories included in the set. DO NOT use other electrical or manual tools. and stable, please tighten by a few rounds each screw one by one. After all screws are connected, then you start to tighten each screw to the end.
ASSEMBLY INSTRUCTIONS Step 1: Attach arms (B, C) to back panel (A) by using bolts (E) and washer(G). Please do not fully tighen bolts until is fully assembled. G E A B C Step 2: Attach seat panel (D) to back panel and arms by using bolts (F) and washer(G). Please fully tighten all bolts at this time.
ASSEMBLY INSTRUCTIONS A 1PC D 1 F Table Board B B 4PCS Table Leg A C 1PC 2 Table Leg Support Ring D E C 8PCS M6*15 3 E 8PCS M6*28 F 16PCS ASSEMBLY TIPS: Please use the hardware and accessories included Washer G in the set. DO NOT use other electrical or manual tools. 1PC and stable, please tighten by a few rounds each screw one by one. After all screws are connected, then you start to tighten each screw to the end.
