Programming instructions

Collectramatic

Fryers – Very Low Pressure/Temperature – LP46, LP56

www.winstonind.com

800-234-5286

TROUBLESHOOTING

FAULT CODE (continued) CORRECTION

12. Collector gasket dirty or damaged .................................. Clean or Replace

See pages 25-27

13. Deadweight dirty or missing ............................................ Clean or Replace

See pages 25-27

14. Lid gasket dirty, damaged, or missing ............................ Clean or Replace

See pages 25-27

15. Lid valve O-ring not seating, or missing .................................... Clean, Adjust, or

Replace

See pages 25-27

16. Lid valve retainer loose ................................................... Adjust, see page 27

17. Maximum allowable temperature exceeded ................... See page 7

18. Aqualert sensing is activated .......................................... See page 31

[CS]-Call for Service (see below)

If cabinet is in warranty, call Winston Industries at 1-800-234-5286. Identify the

following:

1. Model ___________________ Serial # ________________________________

(located on name plate)

2. Your name ______________________________________________________

3. Company name __________________________________________________

4. Company address ________________________________________________

_______________________________________________________________

5. Company phone _________________________________________________

6. Type of problem _________________________________________________

_______________________________________________________________

If cabinet is out of warranty, call the servicer of your choice, or you can call

Winston Industries for an authorized servicer nearest you.