Assembly Instructions

Drain

Hole

Drain

Hole

Table Assembly Instructions for

Oval KD (Knock Down) Base Only & Alternative Top

NOTE- Table design is for illustrative purposes only. Your actual table

design might look dierent.I

MPORTANT: Two people are recommended to eectively and safely

assemble this table due to the size and weight of the product.

Tools required for assembly: 7/16” wrench or adjustable wrench

Refer to illustration.

1. Place Table TOP (A) upside down on a clean, level surface that will not

mar or potentially scratch the top side of the top.

2. Using a 1 ¼” hex head bolt (D) and washer (E), attach the inner ring

(B) to table leg (C). NOTE- make sure the drain holes on the inner

ring (B) are facing up for assembly. The attaching point of the legs

loosely. Repeat this step for the remaining three legs.

3. Place loosely assembled table base onto the table top and align holes

on legs with holes in the underside of the top. Using a ¾” hex head

bolt and washer, screw the legs to the top. Very loosely hand tighten

the two bolts per leg until all four legs are attached to the top.

4. Hand tighten all connections then securely tighten with wrench.

Turn table right side up and enjoy!

Safety First:

• Anumbrellabasemustbeusedwithanumbrella

• Whenumbrellaisnotinuseorinhighwindorinclementweather,itis

recommended that the umbrella be removed from the table and stored.

• Neverleaveanunattendedumbrellaopen.

• Neversitorstandonthetable

PARTS

DESCRIPTON PICTURE QTY DESCRIPTION PICTURE QTY

A Table Top 1 E Flat

Washer

B Inner Ring 1 F ¾” Short

Bolt

C Table Leg 4 G Umbrella

Hole Plug

(if applicable)

D 1 ¼” Long

Bolt