MT3000 FCC ID : OT2MT3000B USER’S GUIDES RADIOPLUS CO., LTD. 42-13 wonmi-dong, Wonmi-ku, Puchon-City, Kyungki-Do, Korea FCC ID : OT2MT3000B This device complies with part 15 of the FCC rules. Operation subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
TABLE OF CONTENTS 1.PRODUCTION’S DISTINCTION--------------------Brain manual page 3 of 11 2. EACH ICON SIMPLE EXPLANATION-------------- Brain manual page 4 of 11 3.SWITCH GUIDESPOT-------------------------- Brain manual page 5 of 11 4.FUNCTION KEY EXPLANATIONS----------------- Brain manual page 6 of 11 4-1.LOCK/UNLOCK------------------------- Brain manual page 6 of 11 4-2.REMOTE START ENGINE ON and OFF.------ Brain manual page 6 of 11 4-3.FIND--------------------------------- Brain manual page 6 of 11 4-4.
with ease. -Safety functions and loading All functions are preserved that used by user even power-off .No need to set mode again after exchanging batteries.
2. EACH ICON SIMPLE EXPLANATION 1.ANTENNA 2.HORN 3.VALET 4.AUTO LOCK/UNLOCK 5.COLD START 6.RESERVE STAR 7.WARM-UP TIME 8.CLOCK 9.VEHICLE LOW BATTERY 10.REMOTOR LOW BATTERY 11.RUNNING ERROR 12.REMOTE CALL 13.REMOTOR MORNING CALL 14.REMOTOR TIME SET 15. REMOTOR POWER OFF 16.PARKING/DRIVING TIME 17.IMPACT (HIGH/LOW) 18.HOOD OPEN 19.DOOR OPEN 20.TRUNK OPEN 21. ENGINE START 22.LOCK/UNLOCK 3.
1.STARTING ENGINE SWITCH AND MENU -Press button to control engine start shortly. -Press button long enough to conclude after choosing function of ICON blinking currently or enter the menu mode to correct detail contents. 2.LOCK/UNLOCK PANIC MODE -Press shortly for lock/unlock operation -Press long for panic on/off operation. -In menu mode, setting ICON becomes movable to right and left. In the detail set-up mode, data adds +1 gradually. 3.AUX. 1/2 OUTPUT SWICH -Press shortly for AUX.1 operation.
equipment through installer. 4-6.TRUNK OPEN. Release car trunk.
5.MENU EXPLANATION. Press menu button to enter menu mode. You can set wanted functions up pressing the front two switches. 5-1.VEHICLE SIREN SET –UP. (ICON PICTURE) Vehicle siren operated at two situations. -When receive data from remoter (repeat a single sound) -Consider it is invaded by someone under the alarm mode (a long sound) Set up the siren for these situations. 5-2.COLD STARTS SETTING-UP. This function is used for warm the engine up in the cold area periodically.
5-7.REMOTE MORNING CALL MODES Set alarm for appointment or wake-up in the morning. 5-8.REMOTER FOR SETTING TIME. Set the current time. 5-9.REMOTOR POWER -OFF. Power-off switch to save battery during long-term absence or no use of alarm mode, for a while. but morning call is still available.
6.SORTS OF ALARM RECEIVER. When receive these alarms, buzzer of remoter occur alarm sound but LCD won’t stop. For example car door must be shut down to close remoter LCD door. But impact is one shot that remote icon vanish after alarming as far as it doesn’t happen continuously. 6-1.LIGHT IMPACT RECEIVERS Not a severe situation alarm but an impact alarm for preparation. Just one disappear among three impact icons. Violent wind, speedy car, slight contact may cause reaction. 6-2.
-When remote engine starting even car started whit her own key. -When remote engine starting is not operated.
7.IN THE CASE OF MANUAL TRANSMISSION VEHICLE. When user parks the car without neutrality of gear, accident might happen when starting engine for cold start, reserve start, remote start. Of course, engine starting won’t be operated under the situation of non-safe parking at the security system. But user has to complete the process of safe parking as follow to remote engine starting. In the case of being registered as manual transmission car by installer. -Engine won’t stop even key is removed after driving.
