User's Manual

User

UserUser

User’s manual

s manuals manual

s manual

The second remote control button.

1. Lock function

: Press button for about 0.5 sec, then the door will be locked.

2. Unlock function

: Press button for about 0.5 sec again, then the door will be

opened.

3. Engine start

: Press button for about 2 sec, the engine will be started.

(To start engine, reservation for engine start should be carried out

in the manual transmission vehicle.)

4. Trunk open

: Press and buttons simultaneously for about 2 sec,

the trunk will be opened.

FCC COMPLIANCE STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION;

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED

OPERATION.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment.

PAGE 1
User’s User s manual The second remote control button. 1. Lock function : Press button for about 0.5 sec, then the door will be locked. 2. Unlock function : Press button for about 0.5 sec again, then the door will be opened. 3. Engine start : Press button for about 2 sec, the engine will be started. (To start engine, reservation for engine start should be carried out in the manual transmission vehicle.) 4. Trunk open : Press and buttons simultaneously for about 2 sec, the trunk will be opened.