User Manual

Please click “Wireless-> WPS” located at the web management interface,
the following message will be displayed on your web browser:
you can establish a wireless connection between wireless adapter and
Router using either Push Button Configuration (PBC) method or PIN
method.
Disable WPS: Enable / Disable
Self-PIN Number: If the new device supports Wi-Fi Protected Setup and
the PIN method, you can add it to the network by PIN Number.
PBC method: If the wireless adapter supports Wi-Fi Protected Setup and
the Push Button Configuration (PBC)
Step 1: Press the WPS button of the Router directly for 2 - 3seconds
or Click web management interface ‘Start PBC’.
Step 2: Press the WPS button of the Adapter directly for 3 seconds.
Step 3: Wait for a while until the next screen appears.
Click Finish to complete the WPS configuration.