User Manual

LAN Settings

Please click “Network

LAN Settings ” located at the web management

interface, the following message will be displayed on your web browser:

IP Address: Enter the IP address of your Router or reset it in dotted-

decimal notation Wireless-N Router (factory default:

192.168.10.253).

Subnet Mask: An address code that determines the size of the network.

Normally use 255.255.255.0 as the subnet mask.

DHCP Type: Server, Client or Disable

Note:

1) If you change the IP Address of LAN, you must use the new IP

Address to login the Router.

2) If the new LAN IP Address you set is not in the same subnet, the IP

Address pool of the DHCP server will change accordingly at the same

time，while the Virtual Server and DMZ Host will not take effect until

they are re-configured.