Care & Use Instructions

1) INSTALLING THE LIGHT BAR

INSTALLATION GUIDE

Hardware:

• Universal Mounting Brackets A or B

• 2 sets of M6 Screw with Nut, Spring Washer and Flat Washer

• 2 sets of M6 Screw with Spring Washer and Flat Washer

Tools Required:

• Power Drill and 15/64 in (6mm) Drill Bit (not included)

• Wrench (not included)

• Allen key

• Attach the Universal Mounting Brackets to A or B to the Light Bar and secure with M6 Screw, Spring

Washer and Flat Washer. Tighten the screw with Allen key.

• Choose a suitable mounting location for the Light Bar, preferably on the front bumper. Make sure the

location is strong enough to hold the Light Bar.

• Mark two holes for the Universal Mounting Brackets for a precise installation. Make sure nothing

beneath will be damaged after the holes are drilled.

• Drill the holes with a 15/64 inch (6mm) Drill Bit.

• Mount the Light Bar with the provided hardware.

• You can adjust the Light Bar’s beam angle by loosening the M6 Screw. Be sure not to over-tighten the

screw after the adjustment.

NOTE: INSTALL LIGHT BAR ON METAL OR DURABLE MATERIALS ONLY.

Universal Mounting Bracket B

Universal Mounting Bracket A

Universal Mounting

Bracket A

M6 Screw

Universal

Mounting Bracket B

Spring Washer

Flat Washer