User Manual

JDY-25M Super BLE Bluetooth Module
26
FA02 x1x2mac x2：
Action IO number（Value 0x01-0x05）
Mac：
Label MAC address（Value 0x000000000000-0xffffffffffff)
FA03 x1x2 x1：
Label number（Value 0x00-0x09）
x2：Overtime time
（Value 0x00-0x09）
FA04 x1x2 x1：
Label number（Value 0x00-0x09）
x2：
Sensitivity（Value 0x00-0x99）
B101 UUID UUID of iBeacon, length 16 bytes
B202 MAJOR MAJOR of iBeacon, length 2 bytes
B303 MINOR MINOR of iBeacon, length 2 bytes
B404 SING Signal verification value of iBeacon at 1m, length 1byte
A1E1 F101 APP sends this instruction to restart the module, fixed
instruction (A1E1F101)
A2E2 NAME NAME is broadcast name, the maximum length of NAME is 18
bytes
A3E3 PIN PIN connection password, PIN length is 6 bytes
A4E4 TYPE TYPE matching method, length is 1byte
0：No password for connection
1：Password connection and not binding
2：Password connection and binding
A5E5 BAUD BAUD is baud rate, length is 1byte
2：2400
3：4800
4：9600
5：19200
6：38400
7：57600
8：115200
A6E6 01 APP disconnect instruction, fixed instruction（A6E601）
A7E7 STARTEN STARTEN Whether it is power on sleep, the length is 1 byte
1 ： Power on wake-up, sleep can be controlled by sleep
instruction
0：Power on sleep, connect wake-up, disconnect sleep
A8E8 ADVIN ADVIN is broadcast interval, the length is 1 byte
1：100mS
2：200mS
3：300mS
4：500mS
5：700mS
6：100mS
7：1500mS
8：3000mS
9：60000mS