User Manual

JDY-25M Super BLE Bluetooth Module
22
AT+DEVCLSS<Param
>
+OK
Param：00 or ff
F1：indicates that one key binding
function is turned on (In ROLE1mode,
support pressing PWRC pin to bind and
connect to the strongest signal slave
nearby)
Default：0
AT+DEVCLSS +DEVCLSS=<Para
m>
Example: In ROLE1 mode, press PWRC pin to automatically bind the strongest signal slave nearby and send
AT+DEVCLSSF1
45、Set/query - Key label address addition
Instruction Response Parameter
AT+KLABEL<Param1>,<Par
am2>,<Param3>
+OK Param1：label number（Value 0-9）
Param2：action IO number（Value 1-5）
Param3 ： label MAC address （ 12
character string）
Default：0,0,000000000000
AT+KLABEL<Param1
>
+KLABEL=<Param1>
,<Param2>,<Param3>
In ROLE8 key label detection mode, add bracelet or label,
For example, the MAC address of the bracelet is 112233445566. When the bracelet is close to JDY-25M, let OUT2
act. The instructions are as follows.
AT+KLABEL1,2,112233445566
We add another key label. The MAC address of the key label is 888888999999. When the key label is close to
JDY-25M, make OUT5 act, the instruction is: AT+KLABEL2,5,888888999999
46、Set/query - Overtime action time of opening a key label
Instruction Response Parameter
AT+KLTIME<Param>,<Para
m>
+OK Param1：label number（Value 0-9）
Param2：overtime time（Value 0-9）
Param2 default：3
AT+KLTIME<Param> +KLTIME=<Param>,<
Param>
In ROLE8 key label detection mode, bracelet and key labels have been added,
Example: Set the overtime time of the bracelet to 9 seconds. (After the bracelet is close to JDY-25M, OUT2
always outputs high level. When the bracelet leave the JDY-25M range, OUT2 reverts to low level in 9 seconds. If
the bracelet enters the JDY-25M range again within the 9 seconds, OUT2 outputs high level again.)
Instruction: AT+KLTIME1，9