Specification PJX-HLCAM PJX-BL6212 WIFI Module Specification File name: Product specification V1.1 Version: File status: [ ] Draft [√ ] Published [ ] Pending Editor: Finished date: Version V1.
Specification 0 Amendment 1 General Description BL-M3438BS1 product is designed base on CYW43438 chipset. It operates at 2.4GHz band and supports IEEE802.11b/g/n 1T1R with wireless data rate up to 72.2Mbps. It supports IEEE802.11i safety protocol, along with IEEE 802.11e standard service quality. The integrated module provides SDIO interface for WiFi, UART / PCM interface for Bluetooth and UART / PCM interface for FM. 2 Feature ⚫ ⚫ ⚫ ⚫ Operating frequencies : 2.4~2.4835GHz, WIFI host interface is SDIO2.
Specification Operating Frequencies Rx Sensitivity 2.4~2.4835GHz WiFi : 802.11b DSSS: CCK, DQPSK, DBPSK 802.11g OFDM: 64-QAM,16-QAM, QPSK, BPSK 802.11n OFDM: 64-QAM,16-QAM, QPSK, BPSK Infrastructure, Ad-Hoc WiFi: 802.11b: 1, 2 ,5.5,11Mbps, 802.11g: 6,9,12,18,24,36,48,54Mbps, 802.11n-2.4 HT20: MCS0~7, reach up to 72.2Mbps -95dBm (Min) TX Power 18dBm (Max) Antenna Type Connect to the external antenna through the half hole Dimension(L*W*H) 12x 12x1.75mm (LxWxH) Tolerance:+/-0.
Specification WiFi RF Specification TX Power & EVM Receiver Minimum Input Sensitivity@PER 16± 1.5dBm&<-15dB@11b 11Mbps 15± 1.5dBm&<-25dB@11g 54Mbps 14± 1.5dBm&<-28dB@11n-HT20-2.4G-MCS7 11b 1Mbps: -95dBm@PER<8%; 11b 11Mbps:-85dBm@PER<8%; 11g 54Mbps:-72dBm@PER<10%; 11n MCS7:-68dBm@PER<10%; ESD CAUTION: Although this module is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this module. It must be protected from ESD at all times and handled under the protection of ESD.
Specification 6 Remark Storage Temperature and Humidity 1. Storage Condition: Moisture barrier bag must be stored under 30℃, humidity under 85% RH. Humidity indicator cards must be blue, <30%. 2. Products require baking before mounting if humidity indicator cards reads > 30% temp < 30℃, humidity < 70% RH, over 96 hours. Baking condition: 125℃, 12 hours. Baking times: 1 time.
Specification FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Specification To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product “Contains Transmitter module FCC ID: WUI-PJXHLCAM” The modular must be installed in the host that assign by Company name: Winplus Co., Ltd. Product/PMN: PJX-BL6212 Model no./HVIN: HL538822CAM if other host types used would need further evaluation and possible C2PC if they are not significantly similar to the one tested.