User manual

ManualsBrandsWinpac ManualsConsumer electronicsWP-5441

Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Page: 1

TPM-4100/TP-4100/TP-2070/

TP-3080/TP-5120/TP-6150/

TP-7170 Touch Panel

Monitor User Manual

Summary of content (100 pages)

PAGE 1
TPM-4100/TP-4100/TP-2070/ TP-3080/TP-5120/TP-6150/ TP-7170 Touch Panel Monitor User Manual Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 2
 Warranty All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year, beginning from the date of delivery to the original purchaser.  Warning ICP DAS assumes no liability for any damage resulting from the use of this product. ICP DAS reserves the right to change this manual at any time without notice. The information furnished by ICP DAS is believed to be accurate and reliable.
PAGE 3
Table of Contents Table of Contents ............................................. 3 1. Introduction .................................................. 5 1.1. Features ..................................................................... 7 1.2. Specifications ............................................................. 8 1.3. Dimension ................................................................ 14 1.4. I/O interfaces............................................................ 28 1.5. Companion CD .....
PAGE 4
2.2.1.3. Uninstalling the XP-8000-CE6 ..... 60 2.2.1.4. Other Windows CE6.0 Devices ... 62 2.2.2. Serial Touch Driver ..................................... 63 2.2.2.1. Installation for XP-8000-CE6 ....... 64 2.2.2.2. Configuration for XP-8000-CE6 ... 67 2.2.2.3. Uninstalling the XP-8000-CE6 ..... 69 2.2.2.4. Other Windows CE 6.0 Device .... 71 2.3. Windows XP Embedded .......................................... 72 2.3.1. Universal Driver .......................................... 72 2.3.1.1.
PAGE 5
1. Introduction This chapter provides an overview of the TPM-4100/TP-4100/TP-2070/TP-3080/T P-5120/TP-6150/TP-7170 and its components. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 6
The TPM-4100/TP-4100/TP-2070/TP-3080/TP-5120/TP-6150/TP-7170 Panel Mount Monitor includes a standard TFT LCD screen with a rugged aluminum front bezel resolution and a wide operating temperature range. The TPM-4100/TP-4100/TP-2070/TP-3080/TP-5120/TP-6150/TP-7170 is also guaranteed to integrate with ICP DAS PAC control systems, such as WP-8000 series, LinPAC-8000 series and the XP-8000 series.
PAGE 7
1.1. Features  Support resolution Mode name Size Resolution TP-2070 7” 800 x 480 TP-3080 8.4” TPM-4100/TP-4100 10.4” TP-5120 12.1” TP-6150 15” 1024 x 768 TP-7170 17” 1280 x1024 800 x 600  Full-function OSD control keys for optimizing the display  Driver Support for Windows 2K/XP/Vista/7/XP-Embedded/WinCE 5.0/6.
PAGE 8
1.2. Specifications The table below is a summary of the specifications of the touch panel, and lists the accessories that are supported by the touch panel.
PAGE 9
Model TP-3080 Display Size 8.4” Resolution 800 x 600 Max. Color 16.
PAGE 10
Model TPM-4100 TP-4100 Display Size 10.4” Resolution 800 x 600 Max. colors 16.
PAGE 11
Model TP-5120 Display Size 12.1” Resolution 800 x 600 Max. Color 16.
PAGE 12
Model TP-6150 Display Size 15” Resolution 1024 x 768 Max. colors 16.
PAGE 13
Model TP-7170 Display Size 17” Resolution 1280 x 1024 Max. colors 16.
PAGE 28
1.4. I/O interfaces TP-2070 TP-3080/TP-5120/TP-6150/TP-7170 Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 30
1.5. Companion CD This package includes a companion CD that contains a collection of documentation and device drivers. An outline of the folder structure is illustrated below. CD:\[Model] Driver Win_XP_7 Win_XP_Embedded Touch Driver for Windows 2K/XP/2003/2008/Vista/7 XP-8000 device Touch Driver for the XP-8000 series Other XP Embedded device WinCE V5.0 Touch Driver Other CE5.0 device WP-8000 and WP-5000 device V6.0 Other CE6.
PAGE 31
1.6. System Setup This section gives details regarding system configuration and adjustment and mounting options. 1.6.1. System Configuration There are two kinds of OSD menu in the following description. TP-2070/TP-4100/TPM-4100 support the following OSD menu. Control 1 Function Adjust V-Position, H-Position, Clock and Clock and Clock-Phase 2 Turns OSD main menu on or off 3 Selects adjustment item 4 Selects adjustment item counter-clockwise 5 Decreases the value of the adjustment item 1.
PAGE 32
H-position Move the screen left or right V-position Moves the screen up or down Color setting OSD setting NATIVE Color temperature 9300K Color temperature 6500K Color temperature USER Making adjustments to the R/G/B content. Language Support 8 languages. OSD.H Move the OSD position horizontally on the screen. When the ▲ button is pressed, the OSD control menu will move to the right side of the screen. Likewise, when the ▼ button is pressed, the OSD control menu will move to the left side.
PAGE 33
3 Shift the icon to the left side or shift it down. 4 Shift the icon to the right side or shift it up. 5 1. Enter the OSD menu. 2. Enter the adjustment item. 6 Executing auto adjustment. RUN (Data) and PWR (Power) LED The RUN (Data) LED and PWR(Power) LED are situated in the top right-hand corner. The “Data” and “Power” characters are used at the initial stage. Now the characters are changed. See the following picture. “Data” to “RUN”. “Power” to “PWR”.
PAGE 34
Display Modes__ The following display modes are supported for WP-8000 and XP-8000 series. Platform Supported Resolution Supported Vert. Sync.(Hz) WP-8x4x 800 x 600 55.8/56.6 TP-6150: 55.8 640 x 480 Don’t care TP-2070: Supported by the WP-8x4x OS version 1710 and upward. WP-8x3x 1024 x 768 60/70/75 TP-6150: 60/75 800 x 600 60/72/75 TP-6150: 60/72 640 x 480 56/60/62/70/72/75 TP-6150: 72 WP-5x4x 800 x 600 55.8/56.
PAGE 35
1024 x 768 60/70/75 800 x 600 60/70/75 640 x 480 60/70/75 The following display modes are supported for other devices. Resolution Horiz. Sync. Vert. Sync. 640 x 480 31.4 KHz 50 Hz 31.4 KHz 59.9 Hz 37.5 KHz 75 Hz 720 x 400 31.4 KHz 70 Hz 800 x 600 35.1 KHz 56.2 Hz 37.8 KHz 60.3 Hz 46.9 KHz 75 Hz 48.3 KHz 60 Hz 56.4 KHz 70 Hz 60.0 KHz 75 Hz 1024 x 768 Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
PAGE 36
1.6.2. Panel Mounting Insert the mounting brackets. Screw the mounting bracket to the unit. Eight locations are available for attaching four mounting clamps to secure the unit. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 37
Panel thickness up to 6 mm. Refer to Sec.1.3 for default information regarding the dimensions of the panel. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 38
2. Touch Driver Setup This chapter provides a overview that describes the steps required for installing, uninstalling, and configuring the touch driver. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 39
2.1. Windows CE 5.0 This section describes how to install, calibrate and uninstall the touch driver for the WP-8000 series and WP-5000 series, and gives details of how to obtain drivers for other CE5 devices. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 40
2.1.1. USB Touch Driver Two USB touch drivers are available. The first is for WP-8000 series modules and WP-5000 series modules of ICP DAS PAC controllers, and the second is for other Windows CE5.0 systems.
PAGE 41
2.1.1.1. Installation for WinPAC-8000 and WinPAC-5000 The following procedure describes how to install the PenMount USB touch driver. 1. Copy the driver from the CD-ROM to the WinPAC. The “PenMount_USB_TOUCH_Vyyyymmdd.CAB” driver file can be obtained from: [name] Driver path TP-2070/TP-3080/TP-5120 CD:\[name]\Driver\WinCE\V5.0\WP-8000 and WP-5000 device TPM-4100_TP-4100/ For example: TP-6150/TP-7170 CD:\TP-6150\Driver\WinCE\V5.
PAGE 42
Tips 1. Appendix A  “A.1. Don’t install USB and serial touch driver simultaneously in a device” Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 43
2.1.1.2. Configuration for WinPAC-8000 and WinPAC-5000 Calibration 1. From the “Start” menu, click “Programs””USB_TOUCH” ”PenMount””Calibration”. 2. Follow the instructions on the screen to begin calibration. 3. Once calibration has been completed, from the “Start” menu, click ”Programs”Open the “WinPAC Utility”, and then click the “Save and Reboot” option from the “File” menu. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd.
PAGE 44
Simulating the Right Mouse Button 1. From the Start menu, click “Programs””USB_TOUCH” ”PenMount””RightButton”. 2. Show a screen below (Left picture) Click the “mouse”  Turn into right picture. Click the “mouse” 3. Become Click any object: Click “My device” to test if the function of “RightButton” works. If the screen below shows, the function of “RightButton” works. 4. The operation of the right mouse button can be simulated by repeating Step 2 and Step 3 for any object.
PAGE 45
2.1.1.3. Uninstalling the WinPAC-8000 and WinPAC-5000 The following procedure describes how to uninstall the PenMount USB touch driver. 1. From the “Start” menu, click “Programs””USB_TOUCH” ”PenMount””Uninstall”. 2. A warning pop-up will be displayed asking you to confirm the uninstall request. Click the “Yes” button to uninstall the driver. 3. Once the uninstallation process is complete, a dialog will displayed requesting that you reboot the system.
PAGE 46
2.1.1.4. Other Windows CE5.0 Devices The driver for use with other windows CE5.0 devices can be obtained from: [name] TP-2070/TP-3080/TP-5120/ TPM-4100_TP-4100/TP-6150/TP-7170 Driver path CD:\[name]\Driver\WinCE\V5.0\Other CE5.0 device For example: CD:\TP-6150 \Driver\WinCE\V5.0\Other CE5.0 device or go to the PenMount website to download the latest driver: http://www.penmount.com/down_2_1.php Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd.
PAGE 47
2.1.2. Serial Touch Driver Two serial touch drivers are available. The first is for WP-8000 series modules and WP-5000 series modules of ICPDAS PAC controllers, and the second is for other Windows CE5.0 systems.
PAGE 48
2.1.2.1. Installation for WinPAC-8000 and WinPAC-5000 The following procedure describes how to install the PenMount serial touch driver. Note that the default COM port for serial touch driver is COM4. There is a RS-232 cable in the shipping package (Sec.1). The user can directly use this cable to connect the monitor with COM4 of WinPAC-8000 to use serial touch driver to do a touch operation by serial way. If the user wants to use other com port, please note the position of TX and RX of COM port.
PAGE 49
[name] Driver path TP-2070/TP-3080/TP-5120/ CD:\[name]\Driver\WinCE\V5.0\WP-8000 and WP-5000 device TPM-4100_TP-4100/TP-6150 For example: /TP-7170 CD:\TP-6150 \Driver\WinCE\V5.0\WP-8000 and WP-5000 device Or go to the “\System_Disk\External_device_driver\” folder on the WinPAC. 2. Double-click the “PenMount_Serial_TOUCH_Vyyyymmdd(PM6000R).CAB” file. 3. Show one of two dialogs below. Just click “OK” button to continue installation. Click “OK” button Or 4.
PAGE 50
Tips 1. Appendix A  “A.1. Don’t install USB and serial touch driver simultaneously in a device” 2. Appendix A  “A.2. Don’t plug USB cable when using serial touch driver” Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 51
2.1.2.2. Configuration for WinPAC-8000 and WinPAC-5000 Calibration 1. From the “Start” menu, click “Programs””Serial_TOUCH” ”PenMount””Calibration”. 2. Follow the instruction on the screen to begin calibration. 3. Once calibration has been completed, from the “Start” menu, click ”Programs”Open the “WinPAC Utility”, and then click the “Save and Reboot” option from the “File” menu. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd.
PAGE 52
Changing the COM Port 1. From the “Start” menu, click “Programs””Serial_TOUCH” ”PenMount””SetCOM”. 2. In the pop-up dialog, select the COM Port you wish to use as default and click the “Set” button to save the changes. 3. From the “Start” menu, click ”Programs”Open the “WinPAC Utility”, and then click the “Save and Reboot” option from the “File” menu. 4. Disconnect the cable from the current COM Port and reconnect it to the specified COM Port.
PAGE 53
2.1.2.3. Uninstalling the WinPAC-8000 and WinPAC-5000 The following procedure describes how to uninstall the PenMount serial touch driver. 1. From the “Start” menu, click “Programs””Serial_TOUCH” ”PenMount””Uninstall” 2. A warning pop-up will be displayed asking you to confirm the uninstall request. Click the “Yes” button to uninstall the driver. 3. Once the uninstallation process is complete, a dialog will displayed requesting that you reboot the system.
PAGE 54
2.1.2.4. Other Windows CE5.0 Devices The driver can be obtained from: [name] TP-2070/TP-3080/ Driver path CD:\[name]\Driver\WinCE\V5.0\Other CE5.0 device For example: TPM-4100_TP-4100/ CD:\TP-2070\Driver\WinCE\V5.0\Other CE5.0 device TP-5120/TP-6150//TP-7170 or go to PenMount website to download the latest driver: http://www.penmount.com/down_2_1.php Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 55
2.2. Windows CE 6.0 This section describes how to install, calibrate and uninstall the touch driver for the XP-8000-CE6 series, and gives details of how to obtain drivers for other CE6 devices. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 56
2.2.1. USB Touch Driver Two USB touch drivers are available. The first is for XP-8000-CE6 series modules of ICP DAS PAC controllers and, and the second is for other Windows CE6.0 systems. XP-8000-CE6 series: 1. Using the ATOM CPU: XP-8141-Atom-CE6/XP-8341-Atom-CE6/XP-8741-Atom-CE6 XP-8147-Atom-CE6/XP-8347-Atom-CE6/XP-8747-Atom-CE6 XP-8149-Atom-CE6/XP-8349-Atom-CE6/XP-8749-Atom-CE6 2.
PAGE 57
2.2.1.1. Installation for XP-8000-CE6 The following procedure describes how to install the PenMount USB touch driver. 1. Copy the driver from the CD-ROM to the XP-8000-CE6. The “PenMount_USB_TOUCH_Vxx_yyyymmdd_XPAC_CE6.CAB” driver file can be obtained from: [name] Driver path TP-2070/TP-3080/ CD:\[name]\Driver\WinCE\V6.0\XP-8000-CE6 device\ TPM-4100_TP-4100/ For example: CD:\TP-2070\Driver\WinCE\V6.
PAGE 58
Using the ATOM CPU Using the LX800 CPU Or 4. Once the installation has been completed, a dialog will be displayed advising that the system needs to be rebooted. Click the “OK” button to reboot the XP-8000-CE6. Tips 1. Appendix A  “A.1. Don’t install USB and serial touch driver simultaneously in a device” Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 59
2.2.1.2. Configuration for XP-8000-CE6 Calibration 1. From the “Start” menu, click “Programs””USB_TOUCH” ”PenMount””Calibration”. 2. Following the instructions on the screen to begin calibration. Simulating the Right Mouse Button For details of how to simulate right mouse button functions, please refer to the process described in “Simulating the Right Mouse Button” in Sec. 2.1.1.2 Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd.
PAGE 60
2.2.1.3. Uninstalling the XP-8000-CE6 The following procedure describes how to uninstall the PenMount USB touch driver. 1. From the “Start” menu, click “Settings””Control Panel”. 2. Double click the “Remove Programs” icon and select “ICPDAS USB PenMount” from the “Programs” panel in the “Remove Programs” dialog box and then click the “Remove” button. When the warning pop-up, click “Yes” button to permanently uninstall the driver. 1 2 3 4 Touch Panel Monitor User Manual, version 1.0.
PAGE 61
3. Once the uninstallation process is complete, a dialog will be displayed requesting that you reboot the system. Click the “Yes” button to reboot immediately or click the “No” button if you intend to reboot at a later time. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 62
2.2.1.4. Other Windows CE6.0 Devices The driver can be obtained from: [name] Driver path TP-2070/TP-3080/ CD:\[name]\Driver\WinCE\V6.0\Other CE6.0 device\ TPM-4100_TP-4100/ For example: TP-5120/TP-6150/TP-7170 CD:\TP-2070\Driver\WinCE\V6.0\Other CE6.0 device\ or go to the PenMount website to download the latest driver: http://www.penmount.com/down_2_1.php Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
PAGE 63
2.2.2. Serial Touch Driver Two serial touch drivers are available. The first is for XP-8000-CE6 series modules of ICPDAS PAC controllers and the second is for other Windows CE6.0 systems. XP-8000-CE6 series: 1.Using ATOM CPU XP-8141-Atom-CE6/XP-8341-Atom-CE6/XP-8741-Atom-CE6 XP-8147-Atom-CE6/XP-8347-Atom-CE6/XP-8747-Atom-CE6 XP-8149-Atom-CE6/XP-8349-Atom-CE6/XP-8749-Atom-CE6 2.
PAGE 64
2.2.2.1. Installation for XP-8000-CE6 The following procedure describes how to install the PenMount Serial touch driver. Note that the default COM Port for the touch driver is COM5. There is a RS-232 cable in the shipping package (Sec.1). The user can directly use this cable to connect the monitor with COM5 of XP-8000-CE6 to use serial touch driver to do a touch operation by serial way. If the user wants to use other com port, please note the position of TX and RX of COM port.
PAGE 65
TP-2070/TP-3080/ TPM-4100_TP-4100/ CD:\[name]\Driver\WinCE\V6.0\XP-8000-CE6 device\ For example: CD:\TP-2070\Driver\WinCE\V6.0\XP-8000-CE6 device\ TP-5120/TP-6150/TP-7170 Or go to the “\System_Disk\External_device_driver” folder on the XP-8000-CE6. 2. Double click the “PenMount_Serial_TOUCH_Vxx_yyyymmdd_XPAC_CE6(PM6000R).CAB” file. Tips & Warnings The driver (*.cab) file can only be used once.
PAGE 66
4. Once the installation has been completed, a dialog will be displayed advising that the system needs to be rebooted. Click the “OK” button to reboot the XP-8000-CE6. Tips 1. Appendix A  “A.1. Don’t install USB and serial touch driver simultaneously in a device” 2. Appendix A  “A.2. Don’t plug USB cable when using serial touch driver” Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 67
2.2.2.2. Configuration for XP-8000-CE6 Calibration 1. From the “Start” menu, click “Programs””Serial_TOUCH” ”PenMount””Calibration” 2. Follow the instruction on the screen to begin calibration. You will be presented with one of two screens depending on the CPU you are using. If you are using the LX800 CPU, the screen will look like this. If you are using the ATOM CPU, the screen will look like this. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co.
PAGE 68
Change the COM Port 1. From the “Start” menu, click “Programs””Serial_TOUCH” ”PenMount””SetCOM”. 2. Just choose the COM portClick “Set” buttonClick “Yes” button to reboot the system. The baudrate for the touch monitor is 19200 bps, so please don’t modify the baudrate of touch driver. 1 2 3 Simulating Right Mouse Button For details of how to configure right mouse button simulation, please refer to the process describes in “Simulating the Right Mouse Button” in Sec.2.1.1.
PAGE 69
2.2.2.3. Uninstalling the XP-8000-CE6 The following procedure describes how to uninstall the PenMount serial touch driver. 1. From the “Start” menu, click “Settings””Control Panel”. 2. Double click the “Remove Programs” icon and select “ICPDAS Serial PenMount” from the “Programs” panel in the “Remove Programs” dialog box and then click the “Remove” button. When the warning pop-up, click “Yes” button to permanently uninstall the driver. 1 2 3 4 Touch Panel Monitor User Manual, version 1.0.
PAGE 70
3. Once the uninstallation process is complete, a dialog will be displayed requesting that you reboot the system. Click the “Yes” button to reboot immediately or click the “No” button if you intend to reboot at a later. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 71
2.2.2.4. Other Windows CE 6.0 Device The driver can be obtained from: [name] Driver path TP-2070/TP-3080/ TPM-4100_TP-4100/ CD:\[name]\Driver\WinCE\V6.0\Other CE6.0 device\ TP-5120/TP-6150/TP-7170 For example: CD:\TP-2070\Driver\WinCE\V6.0\Other CE6.0 device\ or go to the PenMount website to download the latest driver: http://www.penmount.com/down_2_1.php Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
PAGE 72
2.3. Windows XP Embedded The touch driver for XP embedded is a universal driver. USB and Serial both use the same driver. 2.3.1. Universal Driver Two universal touch drivers are available. The first is for XP-8000 series modules of ICP DAS PAC controller, and the second is for other Windows XP embedded system. XP-8000 series: 1.Using ATOM CPU XP-8141-Atom/XP-8341-Atom/XP-8741-Atom 2. Using LX800 CPU XP-8041/XP-8341/XP-8741 Touch Panel Monitor User Manual, version 1.0.
PAGE 73
2.3.1.1. Installation for XP-8000 The following procedure describes how to install the PenMount universal touch driver. There is a RS-232 cable in the shipping package (Sec.1). The user can directly use this cable to connect the monitor with COM5 of XP-8000 to use universal touch driver to do a touch operation by serial way. If the user wants to use other com port, please note the position of TX and RX of COM port. About the pin assignment, please refer to the user manual of the XP-8000. COM5 1.
PAGE 74
2. TPM-4100_TP-4100/ For example: TP-5120/TP-6150/TP-7170 CD:\TP-2070\Driver\Win_XP_Embedded\XP-8000 device\ Executing XPAC Utility to disable EWF on desktop. 1 2 3 4 3. Double click Setup.exe in the driver’s folder. 4. Click “Next” button to continue installation. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 75
5. Click “I Agree” button. 6. Click “Install” button to install driver to destination folder. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 76
Tips & Warnings If a screen appears that shows “Found New Hardware Wizard”. Do not use this hardware wizard. Press Cancel. If a screen appears that shows “Hardware Installation”. Please press “Continue Anyway”. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 77
7. Click “Finish” button. 8. Restart XP-8000. 9. Connect USB or serial cable to XP-8000(USB and serial can not be used simultaneously). If the USB or serial touch doesn’t work, please follow the steps below. a. From the “Start” menu, click “Programs””PenMount Universal Driver””PenMount Control Panel”. b. “Device” tabclick “Refresh” button to search USB or serial touch screen monitor if search is successful, “PenMount 6000 USB” or “PenMount 6000 RS232” will show.
PAGE 78
USB touch 2 1 2 1 Serial touch c. If search is successful, USB or serial touch driver has been installed. 10. Executing XPAC Utility to enable EWF on desktop. 1 2 3 4 11. Restart XP-8000. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 79
Tips 1. Appendix A  “A.2. Don’t plug USB cable when using serial touch driver” Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 80
2.3.1.2. Configuration for XP-8000 Calibration From the “Start” menu, click “Programs””PenMount Universal Driver” 1. ”PenMount Control Panel”. Check if the pattern “PenMount 6000 USB” or “PenMount 6000 RS232” 2. shows. If yes, select a device and click “Configure” button. If no, refer to Sec.2.3.1.1. 1 1 Or 2 2 USB touch driver 3. Serial touch driver Click “Standard Calibration” to calibrate. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co.
PAGE 81
Click here to calibrate 4. Executing XPAC Utility to disable EWF to save setting on desktop. 1 2 3 4 5. Restart XP-8000. 6. Executing XPAC Utility to enable EWF on desktop. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 82
1 2 3 4 7. Restart to XP-8000 for the changes to take effect. Change the COM Port For serial touch driver Method1: The touch driver will detect all com port to find what com port connects to serial touch screen monitor automatically when XP-8000 reboots every time. Method2: Please refer to the Step 9 of Sec.2.3.1.1 to detect again. Simulating Right Mouse Button 1. From the “Start” menu, click “Programs””PenMount Universal Driver” ”PenMount Control Panel”.
PAGE 83
2. Click “Right Button Icon” 3. Show a screen below (Left picture) Click the “mouse”  Turn into right picture. 4. Click any object: Click “My computer” to test if the “Right Button Icon” function work. If the screen below shows, the “Right Button Icon” function works. 5. You can simulate the operation of right mouse button to repeat step3 and step4 for any object. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
PAGE 84
2.3.1.3. Uninstall for XP-8000 The following procedure describes how to uninstall the PenMount universal touch driver. 1. Executing XPAC Utility to disable EWF to start to save setting. 1 2 3 4 2. From the “Start” menu, click “Programs””PenMount Universal Driver” ”Uninstall”. 3. Click “Yes” button. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 85
4. Click “Yes” button to reboot. 5. After reboot, executing XPAC Utility to enable EWF on desktop. 1 2 3 4 6. Restart XP-8000. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 86
2.3.1.4. Other Windows XP Embedded Devices The driver can be obtained from: [name] Driver path TP-2070/TP-3080/ TPM-4100_TP-4100/ CD:\[name]\Driver\Win_XP_Embedded\Other XP Embedded device\ TP-5120/TP-6150 /TP-7170 For example: CD:\TP-2070\Driver\Win_XP_Embedded\Other XP Embedded device\ or go to the PenMount website to download the latest driver: http://www.penmount.com/down_2_1.php Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd.
PAGE 87
2.4. Windows XP/7 The touch driver for 2k/XP/2003/2008/Vista/7 is a universal driver. USB and Serial both use the same driver. 2.4.1. Universal Driver This section describes how to install, calibrate and uninstall the universal driver for 2k/XP/2003/2008/Vista/7. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 88
2.4.1.1. Installation The following procedure describes how to install the PenMount universal touch driver. 1. Copy the driver from the CD-ROM to your device. The touch driver can be obtained from: 2. [name] Driver path TP-2070/TP-3080 CD:\[name]\Driver\Win_XP_7\ TPM-4100_TP-4100/ For example: TP-5120/TP-6150//TP-7170 CD:\TP-2070\Driver\Win_XP_7\ Connect USB or serial cable to your device (USB and serial can not be used simultaneously). 3. Executing Setup.exe. 4.
PAGE 89
6. Click “Install” button to install driver. 7. Click “Finish” to finish installation. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 90
Tips & Warnings When the system first detects a touch monitor, a screen appears that shows “Unknown Device”. Do not use this hardware wizard. Press Cancel. 8. If the USB or serial touch doesn’t work, following the steps below: a. From the “Start” menu, click “All Programs””PenMount Windows Universal Driver””Utility””PenMount Control Panel”. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 91
b. “Device” tabclick “Refresh” button to search USB or serial touch screen monitor if search is successful, “PenMount 6000 USB” or “PenMount 6000 RS232” will show. 2 USB touch 1 2 Serial touch 1 c. If search is successful, the USB or serial touch driver has been installed. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 92
Tips 1. Appendix A  “A.2. Don’t plug USB cable when using serial touch driver” Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 93
2.4.1.2. Configuring Calibration From the “Start” menu, click “All Programs””PenMount Windows 1. Universal Driver””Utility””PenMount Control Panel”. Check if the pattern ”PenMount 6000 USB” or “PenMount 6000 RS232” 2. shows. If yes, select a device and click “Configure” button. If no, refer to Sec.2.4.1.1. 1 1 Or 2 2 USB touch driver 3. Serial touch driver Click “Standard Calibration” to calibrate. Touch Panel Monitor User Manual, version 1.0.
PAGE 94
Click here to calibrate Change the COM Port For serial touch driver Method1: The touch driver will detect all com port to find what com port connects to serial touch screen monitor automatically when PC reboots every time. Method2: Please refer to the Step 8 of Sec.2.4.1.1 to detect again. Simulating Right Mouse Button For details of how to configure right mouse button simulation, please refer to the process describes in “Simulating the Right Mouse Button” in Sec.2.3.1.2.
PAGE 95
2.4.1.3. Uninstall The following procedure describes how to uninstall the PenMount universal touch driver. 1. XP:StartAll ProgramsPenMount Windows Universal DriverUninstall. Win7: Control PanelProgramsPrograms and Features 2. Click “Next” button. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 96
3. Click “Uninstall” button. 4. Click “Finish” button to reboot. Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.
PAGE 97
Appendix A. Tips A.1. Don’t install USB and serial touch driver simultaneously in a device Platform: WP-8000/WP-5000/XP-8000-CE6 series contorller If USB and serial touch drivers are installed at the same time in a device, USB and serial touch drivers will conflict. Please install only one touch driver in a device every time. We suggest this installation below Please don’t do this installation below Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd.
PAGE 98
A.2. Don’t plug USB cable when using serial touch driver Platform: WP-8000/WP-5000/XP-8000-CE6 series controller Problem: Only serial touch driver is installed but both USB and RS-232 cables are plugged. Effect: RS-232 touch can’t work normally. Reason: The OS uses wrong USB driver and the driver conflicts with serial touch driver. There are still other USB drivers in OS although USB touch driver is not installed. Solution: Remove USB cable and restart the device.
PAGE 99
Appendix B. Revision History Revision Date Description 1.0.2 August 2012 First release 1.0.3 September 2013 1. Modify specifications about TP-4100/TPM-4100 2. Modify the name of serial driver for WinPAC-8000 and WinPAC-5000 3. Add “Tips & Warnings” to Step6 in Sec.2.3.1.1 1.0.4 September 2013 Add related description of “TP-3070” 1.0.5 October 2013 Add related description of “TP-6150/TPM-6150” 1.0.6 December 2013 Modify the model name: TP-3070 to TP-2070 1.0.7 June 2014 1.
PAGE 100
1.0.8 July 2014 Add “A.1” and “A.2” of Appendix A 1.0.9 January 2015 Modify LED characters. “Data” to “RUN”. “Power” to “PWR”. See the section 1.6.1 “System Configuration” Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.