Owner Manual

The Touch of a soft cloth is all

the maintenance your wood

pieces will ever need.

Never use harsh chemicals or

abrasive cleaner as they could

mark or destroy finish.

Care And Maintenance

Do not tighten all screws / bolts

until all completely assembled.

Remove all wrapping materials

including staples & packing straps

before you start to assemble.

Check to be sure that you have all

parts and hardware.

Place all wooden parts on a clean

and smooth surface such as a rug

or carpet to avoid the parts from

being scratched.

Allen key (h) is needed for most of the operation .

Assemble leg (1) to leg (2) with wood dowel .

Repeat the same step for the other side of leg .

Assemble leg Assemble(1 , 2) and (3 , 4) .

Assemble Seat Cushion (7) and seat apron (6) . Use

Bolt (f) Flat Washer (d) , Spring Washer (b) only .

PAGE 1
Allen key (h) is needed for most of the operation . Assemble leg (1) to leg (2) with wood dowel . Repeat the same step for the other side of leg . Assemble leg Assemble(1 , 2) and (3 , 4) . Assemble Seat Cushion (7) and seat apron (6) . Use Bolt (f) Flat Washer (d) , Spring Washer (b) only . Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. Check to be sure that you have all parts and hardware.
PAGE 2
Assemble stretcher frame to stool leg with Bolt (f), Spring washer (b) and Flat Washer (d) then insert Wood Button (i) Assemble Triangle Block (8) at 4 sides of Stool Leg with DW Screw (g) Attach Swivel Plate (a) to the Stool leg using Bolt (e), Spring washer (b) and Flat Washer (c). Tight evenly. Assemble completed Seat cushion/Apron (6,7) to Swivel Plate (a) which is now attached to the Stool Leg. tighten all screws evenly and then turn each screw for final fasten.