Company name WINNERCOM WINNERCOM www.winant.co.kr CN7 NFC Touch Door Handle User Manual V 1.0 Winnercom Co., Ltd.
Contents WINNERCOM 1. Introduction 2. NFC Door Handle Design(BOM) & Application 3. Attentions 4. Specifications 5.
1. Introduction WINNERCOM Door handle Module (DHS) NFC & Capacitive Touch Pocket Light LED Hi-Speed CAN The door handle module for Automotive has a NFC Reader and lock/Unlock 2Channel Capacitive touch Sensor function. This module is installed inside of the door handle covers and will be attached to the outside door panel. This module is communicated with CAN network which enables to connect to the car network to send the signal of lock and unlock of door and Pocket light LED On/Off control.
2. NFC DHS Design(BOM) & Application WINNERCOM CN7 - NFC Touch Door Handle ITEMS SPECIFICATION Size 144(L) X 17(W) X 12.85(H) Color Black Weight 47.5g +/- 2.2% Waterproof Polyurethane full potting inside of module. Protective of humidity ,vibration, waterproof.
3. Attentions WINNERCOM Please always mount the Door handle Module before power on the device to avoid circuit damage Before power on the Module, check the power supply(Fig. 1) Module Input Power connect to the connector(Fig. 1) Pin #. Name Description In/Out Color I/O Level 1 BAT(+) Power Supply Power Red Battery DC +12V 2 - N.C - - - 3 CANL CAN Low Signal I/O White 2.5±TBD V 4 CANH CAN High Signal I/O Black 2.5±TBD V 5 - N.
4. Specifications WINNERCOM NFC Touch Data Frequency Range 13.56MHz for NFC Operating Voltage 9.0 ~ 16.0 [Vdc], Typical 12.0 [Vdc] Current Max 0.45mA @ Sleep Mode, Max 100mA @ Operation Mode Operating Temp. -40℃ ~ 80℃ Storage Temp.
5. User Information and Instructions WINNERCOM FCC Part 15 Compliance information. FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
