Operating Instructions

13English
Transmitter Extension Method (Pairing)
Pairing settings have been made for transmitter and
receiver of TY-WPS1 Basic Set.
Pairing by connecting the receiver and
transmitter
1
Slide the mode switch to the STD side.
2
Connect the USB terminal of the transmitter
to the USB terminal of the receiver.
USB-C transmitter USB-A transmitter
Use the supplied conversion
adaptor for pairing to connect
the USB-C transmitter.
Wait for a while until the LED of the receiver blinks in
white. Then, pairing starts automatically.
“Pairing…” (pairing in progress) is displayed on the
standby screen.
3
Pairing is complete.
“Pairing OK” is displayed and the LED of the receiver
lights up in white.
09:40 09:40
Pairing... Pairing OK
4
Remove the USB cable of the transmitter
from the receiver.