Operating Instructions Basic Guide Wireless Wi Wirele W ess P Presentation System For business use Model No. < :36 7 7< :3% 7< :3%& WPS Basic Set WPS Transmitter WPS USB-C Transmitter 7< :3 % 7< :3 %& WPS Transmitter Set WPS USB-C Transmitter Set * WPS is an abbreviation of “Wireless Presentation System”. Thank you for purchasing the Panasonic product. • Please read these instructions before operating this product and retain them for future reference.
Operating Instructions Basic Guide Wireless Wi Wirele W ess P Presentation System For business use Model No. < :36 7 7< :3% 7< :3%& WPS Basic Set WPS Transmitter WPS USB-C Transmitter 7< :3 % 7< :3 %& WPS Transmitter Set WPS USB-C Transmitter Set * WPS is an abbreviation of “Wireless Presentation System”. Thank you for purchasing the Panasonic product. • Please read these instructions before operating this product and retain them for future reference.
Safety Precautions WARNING: Stop using the product immediately when an abnormality or malfunction occurs. Remove the power plug in the case of an abnormality. • Smoke is emitted, or abnormal smell or sound occurs. • Video or audio is not reproduced in some cases. • Liquid such as water or a foreign object has entered inside the product. • The product is deformed or damaged. Using the product in such states may cause a fire or electric shock.
Do not damage the AC adaptor and power plug. by damaging, modifying, forcibly bending, twisting, pulling or bundling them, bringing them close to heat appliances, placing heavy items on them, etc. Doing so may cause a fire or electric shock due to short circuit or disconnection. • Request the dealer for repair of the AC adaptor or power plug. Use the product 15 cm or more away from a location where a cardiac pacemaker is embedded. Radio waves may affect the operation of the pacemaker.
Safety Precautions Continued CAUTION: Do not block the vent hole of this product. Do not push the product into a narrow and poorly ventilated space. Doing so may cause heat to accumulate inside, resulting in a fire or malfunction. Do not place a heavy item on the product. Doing so may cause a fire or malfunction. Do not place the product at a high-temperature location, humid or dusty location, or location subject to oil smoke or steam (such as a cooking table and humidifier).
Accessories Check that you have the accessories and items shown. WPS Basic Set TY-WPS1 WPS Receiver WPS Transmitter Transmitter case (TY-WPR1) ...........1 (TY-WPB1) ...........2 (TY-WPC1) ...........1 WPS USB-C Transmitter TY-WPBC1 Conversion adaptor WPS USB-C for pairing Transmitter (TY-WPBC1) .........1 (DPVF3516ZA/X1)...1 AC adaptor AC adaptor cable HDMI cable (DPVF3514ZA/X1)...1 (DPVF3515ZA/X1)...1 (DPVF3512ZA/X1)...1 USB extension cable Receiver mounting (DPVF3513ZA/X1)...2 bracket (see page 15) ..
Part Names Ŷ Receiver 1 Antenna 2 FUNCTION button / LED Used to save a pairing file to the USB memory. 3 Indicator 1 4 Displays the power supply status, and connection statuses of LAN and USB. 4 Screw holes for mounting bracket (page 15) Used to attach the receiver to the mounting bracket. 2 3 ź Connection terminals / Controls 5 Security Slot This security slot is compatible with a Noble Wedge slot. 6 Power input terminal 7 Power button Turns ON/OFF the power of the receiver.
Ŷ Transmitter 2 3 4 1 HDMI input terminal Connect to an imaging device equipped with HDMI output. 2 USB terminal (Type-A) Connect to a USB power supply device. 3 Main button / LED Switches between on and off of image display. 4 Sub button / LED Switches to the multi-screen mode. 5 Mode switch It is used when pairing. 6 USB terminal (Type-A) Connects a USB memory when pairing with the receiver.
Connection Before connection, carefully read the operation manual of the device to be connected to this system. Turn off the power of each device before connecting cables. 2 Connect a display device such as a display and projector to the receiver with HDMI cable. Connecting the receiver 1 Connect the AC adaptor and AC adaptor cable to the receiver for power supply. Use an AC adaptor conversion plug that fits the shape of outlet.
3 Press the power button of the receiver. When a standby screen is displayed on the display device, the receiver has completed preparation. USB terminal HDMI input terminal For the USB-C transmitter, connect the USB terminal (Type-C) to the image output device. 09:40 2 Main LED changes from red blinking (connecting) to white illumination (standby). Standby screen Connecting the transmitter 1 Connect the USB terminal and HDMI input terminal of the transmitter to the image output device.
Basic Use Single connection Multi connection This section describes how to display an image using one transmitter. 1 Press the main button of the transmitter while the standby screen is displayed. The image is displayed. 09:40 This section describes how to display images simultaneously using multiple transmitters. Images of up to 4 transmitters can be displayed simultaneously. 1 Press and hold the sub button of the transmitter for 1 seconds or more during full screen display.
2 Press the main button of the transmitter of which the image is to be added. The image is added. 1 Full screen display 2 White illumination (standby) 1 2 Details of usage For details of usage, read “Operating Instructions Functional Manual”. Download the “Operating Instructions - Functional Manual” from the following URL. https://panasonic.
Fixing the Transmitter Connection While multiple transmitters are paired and used, you can connect only one transmitter to the receiver and disable switching to another transmitter. This setting prevents accidental transmitter-switching operation. Other transmitters 2 2 Setting the fixed mode Press and hold the main button of the transmitter for 1 seconds or more while an image of one transmitter is displayed.
Transmitter Extension Method (Pairing) Wait for a while until the LED of the receiver blinks in white. Then, pairing starts automatically. “Pairing…” (pairing in progress) is displayed on the standby screen. Pairing settings have been made for transmitter and receiver of TY-WPS1 Basic Set. Pairing by connecting the receiver and transmitter 1 2 Slide the mode switch to the STD side. 3 Pairing is complete. “Pairing OK” is displayed and the LED of the receiver lights up in white.
Transmitter Extension Method (Pairing) Continued Pairing by saving a file to the USB memory Supported device Ɣ Commercially available USB memory devices are supported. (Those with security functions are not supported.) Ɣ USB memory devices other than those formatted in FAT16 or FAT32 cannot be used. Ɣ Up to 32 GB of USB memory in size are supported. Ɣ Only single partition configuration is supported. 1 3 4 Remove the USB memory. 5 Supply power to the transmitter.
Installing the Receiver Components for receiver mounting bracket Check the following parts are included. Base bracket (A-1) .................1 (DPVF3503ZA/X1) Connecting bracket A (A-2) ..1 (DPVF3505ZA/X1) Used to install on the display. Connecting bracket B (A-3)… .1 (DPVF3504ZA/X1) Used to install on the display. 1 Place the base bracket (A-1) aligning it with the 4 screw holes on the bottom surface of the receiver. 2 Fix the base bracket (A-1) with 4 screws (C-2). Sheet A (B-1) ...................
Installing the Receiver 3 Continued Fix the receiver to the ceiling or wall with 2 screws. Ɣ Installing on the projector Use screws (commercially available) of the appropriate type and length according to the ceiling or wall to be installed. (Recommended size: M4) Other installation method The receiver can be installed on the display or projector. Ɣ Installing on the display 16 English For details of installation method, read “Operating Instructions - Functional Manual”.
Notes on Using Wireless LAN Wireless LAN uses radio waves in the 5 GHz bands. Be sure to read and fully understand the following items before use. If at all possible, avoid the use of cellular phones, TV sets or radios near the product. Ɣ Cellular phones, TV sets, radios and similar devices use different radio bands from the product, so there is no effect on wireless communication or the transmission and reception of these devices. However, radio waves from the product may produce audio or video noise.
Notes on Using Wireless LAN Continued Declaration of Conformity (DoC) “Hereby, Panasonic Corporation declares that this product is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/ EU.” If you want to get a copy of the original DoC of this product, please visit the following website: http://www.ptc.panasonic.
Request Regarding Security When using this product, take safety measures against the following incidents. Ɣ Personal information being leaked via this product Ɣ Unauthorized operation of this product by a malicious third party Ɣ Interfering or stopping of this product by a malicious third party Take sufficient security measures.
Request Regarding Security Continued Depending on the specifications of the wireless LAN, a malicious third-party may be able to break security settings by special means. Please contact Panasonic if you need help taking care of security settings or other such. If you cannot perform security settings for your wireless LAN by yourself, please contact the Panasonic Support Center.
Specifications Ŷ Receiver Model No. Product name Video output Output resolution Number of simultaneous connections Wireless communication standard Data rate wireless Frequency band Security Reachable distance FUNCTION LED White blinking White illumination Ŷ Transmitter TY-WPR1 WPS Receiver HDMI × 1 (HDCP1.4) 1920 x 1080/60p, 3840 x 2160/30p (max.) 32 IEEE802.11a/n/ac %OXHWRRWK *)6. ʌ '436. '36. 867 Mbps (max.
Software License This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LIBRARY General Public License, Version 2.0 (LGPL V2.0), (5) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Panasonic System Solutions Company of North America Division of Panasonic Corporation of North America Two Riverfront Plaza Newark, NJ 07102 PANASONIC PROFESSIONAL DISPLAY Limited Warranty Panasonic System Solutions Company of North America (referred to as “the Panasonic ”) will repair the Professional Video product (the “Product”) and its accessories as defined All Professional Display 3 Years in the attached table, with new or refurbished parts, free of Model charge in the continental USA, during the ap
This warranty is extended only to the original purchaser and is nontransferable. A purchase receipt or other proof of date of original purchase will be required before warranty service is rendered. Whenever the date of original purchase cannot be satisfactorily determined, the date of manufacture of the unit will be deemed to be the effective date of the warranty. Panasonic reserves the right to audit and reject any warranty claim that cannot be substantiated.
Trademark Credits • HDMI, High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. • USB Type-C and USB-C are trademarks or registered trademarks of USB Implementers Forum. • PressIT is a trademark of Panasonic Corporation. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
Customer’s Record The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
