Operating Instructions

9English
Pairing by saving a file to the USB memory
Supported device
●
CommerciallyavailableUSBmemorydevicesare
supported. (Those with security functions are not
supported.)
●
USB memory devices other than those formatted in
FAT16 or FAT32 cannot be used.
●
Up to 32 GB of USB memory in size are supported.
●
Only single partition configuration is supported.
1
Connect the USB memory to the USB
terminal of the receiver board.
1
2
2
Press the FUNCTION button.
TheFUNCTIONLEDlightsupinwhiteandthe
pairing file is saved to the USB memory.
3
Remove the USB memory.
4
Slide the mode switch to the EXT side.
5
Supply power to the transmitter.
6
5
6
5
TY-WPB1
TY-WPBC1
5 V/0.9 A
Power supply
5 V/0.9 A
Power supply
6
Connect the USB memory to the USB
terminal of the transmitter.
7
Pairing is complete.
The main LED of the transmitter lights up in white.
8
Remove the USB memory from the
transmitter.