Operating Instructions

8 English
Transmitter Extension Method (Pairing)
Pairing by connecting the receiver board
and transmitter
1
Slide the mode switch to the STD side.
2
Connect the USB terminal of the transmitter
to the USB terminal of the receiver board.
TY-WPB1
Note
• Pairing cannot be performed by
connectingtheTY-WPBC1to
the receiver board. Save the file
to the USB memory for pairing.
(see page 9)
WaitforawhileuntiltheFUNCTIONLEDofthe
receiver board blinks in white. Then, pairing starts
automatically.
“Pairing…” (pairing in progress) is displayed on the
standby screen.
3
Pairing is complete.
“Pairing OK”isdisplayedandtheFUNCTIONLEDof
the receiver board lights up in white.
Pairing... Pairing OK
4
Remove the USB cable of the transmitter
from the receiver board.