Operating Instructions

6 English
Basic Use
Receiver board
1
Turn on the display.
2
Switch the input of the display to [SLOT].
3
Pair the receiver board and the transmitter.
(when connecting for the first time, see page 8)
4
When the standby screen appears on the
display, preparation of the receiver board is
complete.
Standby screen
Transmitter
1
Connect the USB terminal and HDMI input
terminal of the transmitter to the image
output device.
• For power supply to the transmitter, 5 V/0.9 A
power supply is necessary.
HDMI input
terminal
TY-WPBC1
USB terminal
TY-WPB1
ForTY-WPBC1,connecttheUSBterminal(Type-C)to
an image output device that supports the DisplayPort
ALT Mode.