Operating Instructions
Table Of Contents
10 English
Setting
[Setup] menu (display setting)
When this product is connected to the compatible
display and the [Setup] menu is set, the following
functions can be used.
This section explains each setting using the
display SQ1 series as an example. For settings
on other models, see the Panasonic information
site.
Panasonic display link function
Just connect the receiver board to a Panasonic display
supporting this product and turn them on to perform
the link operation. (It is necessary to set [Wireless
presentation link] to [On].)
Set link function details in the following setting menus.
■
External device link settings
Sets external device link.
[External device link settings]- submenu screen
External device link settings
Device information Off
Wireless presentation link
On
●
[Device information]
Sets whether to display or hide the information of the
device connected to the HDMI terminal and SLOT.
[Off]: Connecteddeviceinformationisnot
displayed.
[On]: Connecteddeviceinformationisdisplayedas
shown below.
SLOT
16:9
PressIT
Note
• The obtained information of either signal or HDMI-
CECisdisplayed.
• Up to the first 16 characters obtained are displayed.