Quick Start Guide

Press the EZCast TwinX button to stop mirroring or restart mirroring.

Press the reset button (or insert the pin to press) for 2 seconds on

EZCast wireless display receiver. Release the button when the

screen shows “Release the button to pair with EZCast”. Please

make sure your receiver has been upgraded to the latest version.

Note: All EZCast wireless display receiver on our website supports

EZCast TwinX pairing, except for Magic series products.

How to pair EZCast TwinX with receiver

Turn on pairing mode for receiver

Note: There are 3 mode for reset button on receiver, depending

on pressing duration.

(1) Simple click: Switch the receiver to 2.4G/ 5G Hz Wi-Fi mode.

(2) Press for 2 seconds: Turn on pairing mode for EZCast TwinX.

(3) Press for 10 seconds: Reset the receiver to default.

Plug EZCast TwinX on laptop or mobile to provide power. Press the

EZCast TwinX button to complete pairing while the screen shows

“Ready to pair”.

Press the EZCast TwinX button

Release the button to pair with EZCast

Ready to pair

secs