Quick Start Guide

QuattroPod
Receiver
QuattroPod
Transmitter
Pairing:
To pair Quattro TX with RX for first time use may be needed. It’s suggested if you are not sure
QuattroPod TX has ever paired with the Quattro RX you want to cast.
1. Adjust the switch of the side to right .
Plug Quattro TX’s USB cable onto Quattro RX’s USB port in the rear.
2. The Main LED and Side LED will start blinking while pairing, after pairing is done, the Rx’s
main LED will turn to White and Tx LED will stop blinking.
3. LED indicator’s sequence will be
Notice: when you see main button & side button remain blinking for while , it
has 3 possibilities, Upgrading, Pairing, or Error (Disconnecting).