Quick Start Guide

Introduction
Firstly, thanks for choosing QuattroPod as wireless presentation facility. It integrates
powerful dual core SoC and advanced 802.11ac 5G Wi-Fi/Bluetooth (GFSK,п/4-DQPSK,
8DPSK) to provide you a smooth wireless display experience, and it supports almost
all devices. Our features not only support ‘’Split Screens Display”, “ Host Control
System” but also let cross platform devices throw the contents in APP-independence.
It provides a more friendly and efficient environment for BYOD (Bring Your Own
Devices) with wireless projection in legacy/ existing projectors or monitors you have!
Enjoy them and help you to achieve more collaboration!
What’s in the box?
When you open the box, it contains
 QuattroPod Receiver (hereinafter called Rx) with external antennas, x1
 QuattroPod Transmitter (hereinafter called Tx) with USB cable, x2
 5V Universal Adapter, x1
 HDMI Cable for Rx, L 100cm, x1
 HDMI Cable for Tx, L 30cm, x1
 DP Cable for Tx, L 30cm, x1
 Quick Start Guide, x1
System Requirement:
-PC: Any PC or laptops with HDMI output or mini DP (DP2.0) output
-Tablet/Smart Phone: iOS 10 above and Android 5.0 above
*Important: Android device must turn ADB mode in advance
Installation:
QuattroPod RX:
1. Connect Power with the adaptor
2. Connect HDMI with HDMI port with the projectors or displays.
*Notice: Rx is compatible with VESA mounting screw holes. Please use the 5x5 bracket
and M4 screws.
QuattroPod TX:
1. There are 2 ways to supply power to TX.