TA33 Motherboard 3.5” Fanless SBC with TI AM3354 Processor. User Manual / Engineering Spec. Version 1.
FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions： This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "a" digital device, pursuant to part 15 of the FCC rules.
TA33 Motherboard User Manual / Engineering Spec. Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners.
TA33 Motherboard User Manual / Engineering Spec. Packing List Before using this Motherboard, please make sure that all the items listed below are present in your package： TA33 Motherboard User Manual If any of these items are missing or damaged, contact your distributor or sales representative immediately.
TA33 Motherboard User Manual / Engineering Spec. Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronic personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
TA33 Motherboard User Manual / Engineering Spec. Safety and Warranty 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Please read these safety instructions carefully. Please keep this user's manual for later reference. Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. Keep this equipment away from humidity.
TA33 Motherboard User Manual / Engineering Spec. Revision History Version Date 1.0 2013.7.24 First Release Karen Liu 1.1 2014.8.
TA33 Motherboard User Manual / Engineering Spec. Contents CHAPTER 1 1.1 1.2 1.3 1.4 1.5 CHAPTER 2 GENERAL INFORMATION .......................................2 INTRODUCTION ............................................................................... 2 FEATURE ......................................................................................... 2 MOTHERBOARD SPECIFICATIONS .................................................... 3 FUNCTION BLOCK ..........................................................
General Information CHAPTER TA33 Motherboard User Manual / Engineering Spec. 1 This chapter includes the TA33 Motherboard background information.
TA33 Motherboard User Manual / Engineering Spec. Chapter 1 General Information 1.1 Introduction TA33 SBC is an integrated package that provides customers a complete RISC platform for project evaluation, application development and solution feasibility testing that decreases lead-time and lowers initial cost and investment. In peripheral connectivity, TA33 SBC features with one LAN port which supports PoE (Power over Ethernet), six USB 2.
TA33 Motherboard User Manual / Engineering Spec. 1.3 Motherboard Specifications CPU Type CPU Speed LCD interface LAN Memory Type Built-in Storage Audio Edge Connectors On Board Pin-Header Connectors Dimensions Mechanical & environmental TI Cortex A8 AM3354 720MHz 720 MHz LVDS interface supporting up to 1366x768 1 x Giga LAN (supporting PoE function ) 512MB DDR2 SDRAM 533MHz 1GB Nand Flash 1 x Mic Input(2 pin) 2 x Stereo Speaker Out(2 pin) 1 x 2.
TA33 Motherboard User Manual / Engineering Spec. 1.
TA33 Motherboard User Manual / Engineering Spec. 1.
CHAPTER TA33 Motherboard User Manual / Engineering Spec. Installation 2 This chapter provides information on how to use the jumpers and connectors on the TA33 Motherboard.
TA33 Motherboard User Manual / Engineering Spec. Chapter 2 Installations 2.1 I/O Equipment Installation 2.2 12V DC-IN The Motherboard allows plugging 12V DC-IN jack on the board without additional power module converter. 2.3 Serial COM ports There are two built-in COM port (RS232/422/485 selectable; one with 9-pin D-Sub and the other with pin-header) on TA33. When an optional touch-screen is ordered with PPC, serial com port can connect to a serial or an optional touch-screen. 2.
TA33 Motherboard User Manual / Engineering Spec. 2.
TA33 Motherboard User Manual / Engineering Spec. 2.8 Jumper Setting A pair of needle-nose pliers may be helpful when working with jumpers. If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes. Generally, you simply need a standard cable to make most connections. The jumper setting diagram is as below. If a jumper shorts pin 1 and pin 2, the setting diagram is shown as the right one.
TA33 Motherboard User Manual / Engineering Spec. 2.8.1 JP1/JP2/JP8/JP9: RS232 / RS422 / RS485 Selector for COM port Jumpers JP1 and JP2 are configured to operate the COM2 (Pin-header type) in RS-232/422/485 mode. JUMPER RS232* RS422 JP1 2x3 JP2 3x4 RS485 1-2 3-4 5-6 1-2 4-5 7-8 10-11 2-3 5-6 8-9 11-12 2-3 5-6 8-9 11-12 Jumpers JP8 and JP9 are configured to operate the COM1 (9-pin D-sub connector) in RS-232/422/485 mode. 2.8.2 JP3 : LVDS Power Selector 2.8.
TA33 Motherboard User Manual / Engineering Spec. 2.8.4 JP5 : VR/Software 2.8.5 JP6 : Brightness Control(DC/PWM) 2.8.6 JP7 : PWM Level 2.8.7 SW1 : NAND Flash / SD Boot SW1 is designed to define the storage resource to boot from.
TA33 Motherboard User Manual / Engineering Spec. 2.9 Connectors and Pin Assignment The table below lists the function of each of the board’s connectors. Label Function Note LVDS LCD Output 2*20p P:1.
TA33 Motherboard User Manual / Engineering Spec. 2.9.1 CN2: LVDS Connector Pin No. 1 SYMBOL LCDVDD Pin No.
TA33 Motherboard User Manual / Engineering Spec. 2.9.3 USB1/USB2 2 1 Pin SYMBOL Pin SYMBOL 4 3 2 USBVCC 1 USBVCC 6 5 4 USB - 3 USB - 8 7 6 USB + 5 USB + 8 GND 7 GND 2.9.4 CN8: Inverter PIN NAME 1 +BKLPWR 2 +BKLPWR 3 +BKLPWR 4 GND 5 BRIGHT 6 GND 7 BLON_5V 2.9.
TA33 Motherboard User Manual / Engineering Spec. 2.9.6 CN9: Digital I/O PIN NAME PIN NAME 1 GND 6 DOUT0_L 2 DIO_5V 7 DIN3_L 3 DOUT3_L 8 DIN1_L 4 DOUT1_L 9 DIN2_L 5 DOUT2_L 10 DIN0_L 2.9.7 CN6: Light Sensor Connector PIN NAME 1 Light_PWR 2 LED_R# 3 LED_G# 4 GND 5 LS_DATA 6 LS_CLK 7 GND 8 GND 2.9.8 CN11 / CN13: SPK_R / SPK_L PIN NAME 1 LOUT+ 2 LOUT- PIN NAME 1 MOUT+ 2 MOUT- 2.9.
TA33 Motherboard User Manual / Engineering Spec. 2.9.10 CN16: User Reset / Interrupt Switches TA33 Motherboard User Manual 16 PIN NAME 1 +V3.
