User guide

Winmate M700D Tablet PC
User Guide
28
Chapter 8: Using Recovery DVD
Hardware Preparation
User need to prepare following items before start to recover the Tablet
1. USB keyboard
2. USB DVD-ROM Driver
3. USB HUB
• Connect DVD-ROM Driver and Keyboard through USB Hub
• Connect the USB Hub to M700D’s USB port
• Make sure the DVD-ROM driver has been recognized by the M700D tablet.
Start to recover the system by recovery DVD
To recover the system:
1. Reboot the tablet, then press ”Del” key on the keyboard to get into the BIOS setup
mode
2. Set DVD-ROM driver as the first priority of the boot device
3. Choose “Save Changes and Reset” under “Save & Exit” tag.
4. The tablet will reboot again and then press any key on the keyboard when there is a
following message “Press any key to boot from CD or DVD”
5. DOS windows will open and please type reccf
6. The recovery process will be started automatically