User guide

Winmate M700D Tablet PC
User Guide
10
M700D can operate either on the external AC power adapter or internal battery power. It
is suggested that user use AC Power when charge the Tablet PC for the first time.
Please charge the battery before using the Tablet PC for the first time, charge the battery
until the LED indicator turns solid green. To charge the M700D, use a cable or a docking
with appropriate power supply. For more information about Power management, see
chapter xxx.
To charge the battery using 12V DC in:
1. Remove the protective rubbed bumper on the side of the device
2. Locate the DC Jack
3. Connect the power supply output connector to the input power port on the Device
4. The battery charge LED indicates the battery charging status
LED Status Indication
OFF M700D is not charging or not properly connected
Solid Red Low battery
Solid Orange Charging in progress
Solid Green Charging is completed
Use only the AC adapter included with M700D. Using other AC
adapters may damage the Tablet PC
Turning On and Off the Device
Turning the M700D On
1. Place the device on a flat and stable surface or hold it
2. Make sure the device is either connected to AC power or to the battery pack
with power
3. Press and hold the power button for 3 seconds, located on the right side of the
unit